Intro
Preface
Contents
About the Editors
3D Digitizing Practice-Advantage in Reverse Engineering with Accuracy Boost
1 Introduction
2 Problem Definition
3 The Planned Reverse Engineering Method
3.1 Digitizer Fixing Method with CMM
3.2 Surfaces Generation
4 Comparison of Planned Method Over Already Available Method
5 Results and Discussions
5.1 Variation Examination of the Experimental Data
6 Conclusion
References
Cell Arrangement Measurement-A Perfect Usage of Cell Fabricating Framework in an Industry
1 Introduction
1.1 Evaluation Parameter

2 Results and Discussions
3 Graphical Results of Algorithm Versus Evaluating Parameters
4 Conclusion
References
Exploratory and Numerical Examination of Blending of Four Planar Parallel Planes
1 Introduction
2 Problem Specification
3 Experimental Set-up
4 Methodology
5 Governing Equations
6 Results and Discussions
6.1 Graphical Illustrations
7 Conclusions
References
Clutch Operating Mechanism for Disabled People with Leg Amputee
1 Introduction
2 State of the Art
3 Clutch Operating Mechanism for Disabled People
3.1 Finite Element Analysis (FEA)

3.2 Simulation and Results
4 Discussion
5 Conclusion
References
Optimization and Analysis of Front Telescopic Suspension for Electric Bike to Have Comfortable Ride: India Perspective
1 Introduction
2 Methodology
3 Simulation and Analysis
4 Result and Discussions
4.1 Traditional Suspension
4.2 Optimized Suspension
4.3 Structural Analysis
5 Conclusion
References
Design and Analysis of Aluminium Matrix Composite Aircraft Wing Structure
1 Introduction
2 Material Selection
3 Design and Analysis of Wing
4 Results and Discussion
5 Conclusion

1 Introduction
2 Experimental Method
2.1 Slurry Synthesis
2.2 Experimental Setup
3 Numerical Method
4 Result and Discussion
5 Conclusion
References
Experimental Investigation on Geometric Error in Single-Point Incremental Forming with Dummy Sheet
1 Introduction
2 Experimental Plan and Methodology of Present Work
3 Results and Discussion
4 Predictive Model for Geometrical Error (RMSE)
5 Optimization of Geometric Error (RMSE)
6 Conclusion
References
Numerical Investigation on Optimized Convergent Divergent Nozzle in 3S Separator Device