Intro
Organizing Committee
Committee Members
Program Chair
Program Committee
Conference Advisory Committee Members
Technical Advisory Committee Members
List of Reviewers
Preface
Contents
About the Editors
Construction and Structural Engineering
Analysis of RCC Structures Subjected to Spatial Blast Loading
1 Introduction
1.1 Explosion
2 Literature Review
3 Objectives
4 Problem Formulation
5 Methodology
5.1 Description of Data for Trial-IA
5.2 Description of Data for Trial-IB
5.3 Description of Data for Trial-IC

6 Results and Discussion
7 Conclusion
References
Effectiveness of Base Isolation Using Single Friction Pendulum in Plan Irregular Structures
1 Introduction
2 Single Friction Pendulum System (SFP)
2.1 Concept of SFP
3 Model Structure Configuration
4 Loads on Structures
5 Design of SFP Isolator
6 Analysis
7 Results and Discussion
7.1 Modal Analysis
7.2 Time History Analysis
8 Conclusions
References
Review Paper on Behavior of Cold-Formed Steel Sections Under Axial Compression
1 Introduction
2 Methods of Analysis

2.1 Effective Width Method (EWM)
2.2 Direct Strength Method (DSM)
3 Literature
3.1 Channel Sections
3.2 Angle Sections
3.3 Other Shapes
4 Conclusion
5 Future Scope
References
Analysis of Anchorage Zone Stresses in Post-tensioned Concrete Girders
1 Introduction
2 Methods for Analysis and Design of Anchorage
3 Analysis of Anchorage Zone
3.1 End Block with Multiple Anchorages
4 Conclusion
References
A Study on Influence of GGBFS as Binder on Bond Strength Behaviour of Reinforced Concrete
1 Introduction
2 Experimental Methods and Materials

3 Mix Design and Specifications
4 Results and Discussion
5 Bond Strength
6 Microstructure Study (SEM)
7 Fem Analysis of Pull-Out Test
8 Conclusion
References
Comparative Studies on Flexural Strength of Conventional and Alkali-Activated Masonry Elements Designed to Field Mix
1 Introduction
2 Methodology
2.1 Preparation of Masonry Units
2.2 Tests Conducted on Masonry Units
3 Results and Discussion
3.1 Compressive Strength
3.2 Split Tensile Strength
3.3 Flexural Strength
3.4 Cost Analysis
4 Conclusion
References

The Impact of Buildability Factors on Formwork in Residential Building Construction
1 Introduction
1.1 General
1.2 Overview of Formwork
1.3 Buildability
2 Reviews on Impact of Buildability Factors on Formwork in Residential Building Construction
3 Research Methodology and Analysis
4 Discussion of Results
5 Conclusion
References
Performance Evaluation of Deep Beams Using Self-compacting Concrete Subjected to Corrosion
1 Introduction
2 Research Objectives
3 Materials
3.1 Binders
3.2 Aggregates
3.3 Water
3.4 Reinforcing Steel
3.5 Admixture