Intro
Preface
Contents
Forming Machine Tools and Manufacturing Processes
Experimental Characterisation of Tool Hardness Evolution Under Consideration of Process Relevant Cyclic Thermal and Mechanical Loading During Industrial Forging
Abstract.
1 Introduction
2 Methodology
3 Results and Discussion
3.1 Pretesting
3.2 Re-hardening Study
3.3 High Cycle Loading
4 Summary and Outlook
References
Modelling of Hybrid Parts Made of Ti-6Al-4V Sheets and Additive Manufactured Structures
Abstract.
1 Introduction
2 Experimental Setup and Procedure

2.1 Material and Modelling Approach
2.2 Sheet Material Modelling Validation
2.3 Investigated Parameter Combinations
3 Results and Discussion
4 Summary and Outlook
References
Investigation of a Superimposed Oscillation Compression Process for the Production of a Bulk Component
Abstract.
1 Introduction
2 Experimental Setup
3 Results
3.1 Influence on Plastic Work
3.2 Metallographic and Mechanical Properties
3.3 Influence on Surface Quality
4 Conclusion and Outlook
References

Towards an Adaptive Production Chain for Sustainable Sheet-Metal Blanked Components
Abstract.
1 Introduction
2 Implications of Digital Technologies for Manufacturing
2.1 Prerequisites of Data Processing in Manufacturing
2.2 Current Situation
2.3 The Gap
3 Mitigating the Uncertainty in Fine Blanking
Grinding
3.1 Quantifying Process Variations
3.2 Predicting Quality for Intermediary Steps
3.3 From Monitoring to Adaption
4 Defining the Roadmap
References

Investigation on Noise Reduction During Cutting of High-Strength Materials Based on Machine Acoustic Simulation
Abstract.
1 Introduction
2 Measurement of the Noise Emissions of a Cutting Press
3 Modeling
3.1 Elastic Multibody Simulation of Structural Dynamics
3.2 Mapping of the Machine Acoustics
4 Measures of Noise Reduction
4.1 Basics
4.2 Simulation Results
5 Summary
References
Equal-Channel-Angular-Swaging for the Production of Medical Implants Made of Fine-Grained Titanium
Abstract.
1 Introduction
2 Approach
3 Numerical and Experimental Setup

4 Results and Discussion
5 Summary and Outlook
References
Numerical Development of a Tooling System for the Co-extrusion of Asymmetric Compound Profiles on a Laboratory Scale
Abstract.
1 Introduction
2 Numerical Investigations
2.1 Model Setup
2.2 Results and Discussion
3 Conclusions and Outlook
References
Investigation of the Phase Transformation in Hot Stamping Processes with Regard to the Testing Facility
Abstract.
1 Introduction
2 Material and Methodology
2.1 Deformation Dilatometer
2.2 Thermomechanical Simulator
3 Results and Discussion