Intro
Organising Committee
Chief Patron
Patrons
General Chair
Organizing Committee Chair
Program Chairs/Volume Editors
Program Committee
Publicity Chairs
Publication Chairs
Registration Chairs
Session Management Chairs
Local Arrangement Chairs
Members
Preface
Contents
About the Editors
Structural Engineering
Wind Analysis of High-Rise Building Using Computational Fluid Dynamics
1 Introduction
1.1 Drag
2 Literature Review
3 Methodology of Computational Fluid Dynamics
3.1 Dimensional Analysis of Drag

3.2 Analysis by Using ANSYS 16.0
3.3 Figure Below Shows the Geometry of the Enclosure with Building Model
3.4 Meshing
3.5 Setup
3.6 Solution
3.7 Result
4 Experimental Work
4.1 Model Description
4.2 Material
4.3 Wind Tunnel
5 Results and Discussion
6 Conclusions
References
Structural Performance of Modular Buildings: A Review
1 Introduction
2 Materials
2.1 Steel
2.2 Precast Concrete
2.3 Timber
3 Structural Types
3.1 Load-Bearing Wall Type
3.2 Corner-Supported Modules
3.3 Non-load-Bearing Modules

3.4 Modules Placed Around a Central Steel or Concrete Core
4 Behavior of Modular Buildings During Wind and Earthquake
5 Connections
5.1 Vertical Post-tensioned Connections
5.2 VectorBloc Modular Connector
5.3 Steel Bracket Connections
5.4 Bolted Connections
5.5 An Innovative Interlocking System
6 Conclusions
References
Application of Artificial Neural Network (ANN) in the Prediction of Displacement of RC Frame Subjected to Earthquake
1 Introduction
2 Data Collection
3 Artificial Neural Network
4 Results and Discussion
5 Artificial Neural Network Model

6 Conclusions
References
Fatigue Crack Growth Analysis Using Surrogate Modelling Techniques for Structural Problems
1 Introduction
2 Surrogate Modelling Techniques
2.1 Method of Least Squares
3 Fatigue Crack Growth Analysis of Lug with Initial Through-the-Thickness Crack
3.1 Geometry of the Lug
3.2 Loads and Boundary Conditions
3.3 Analytical Procedure
3.4 FE Modelling and Fracture Mechanics Analysis
4 Polynomial-Based Response Model for Lug Analysis
5 Conclusions
References

Dynamic Response of RC Slab Under Drop Test Retrofitted with CFRP Strips Using NSM Technique
1 Introduction
2 Literature Review
3 Objectives
4 Materials Used in the Current Study
5 Specimen Casting and Strengthening by NSM Technique
6 Experimental Setup
7 Experimental Procedure
8 Test Results
9 Observations
10 Conclusions
References
Experimental Studies to Demonstrate the Effect of Clamping Reinforcement on Shear Strength of GPC Adopting Push-Off Specimens
1 Introduction
2 Scope of the Present Investigation