Linked e-resources
Details
Table of Contents
Intro
Preface
Contents
About the Author
1 Controlled and Localized Electrochemical Microfabrication with Moving Sub-Micron Rounded Tip as Tool Electrode
1.1 Introduction
1.2 Method and Materials
1.2.1 Method
1.2.2 Experimental Setup and Materials
1.2.3 Electric Field Simulation
1.3 Results and Discussions
1.3.1 Influences of the Applied Voltage
1.3.2 Influences of Inter-Electrode Gap
1.3.3 Influences of Spherical Tip Diameter of Tool Electrode
1.3.4 Fabrication of High Aspect Ratio Microchannels
1.4 Conclusions
References
2 Peridynamic Simulation for Thermal and Mechanical Behavior of Manufactured Structures with MIG Welding
2.1 Introduction
2.2 Description of Physical Mechanism
2.2.1 Heat Transfer Mechanism
2.2.2 Mechanical Distortion Mechanism with Thermal Effect
2.3 Numerical Simulation of MIG Welding
2.4 Results and Discussions
2.5 Conclusions
References
3 Study on Improving the Performance of Nitinol Cardiovascular Stent by "Fiber Laser-Electropolishing"
3.1 Introduction
3.2 Experimental Materials, Equipment and Methods
3.2.1 Materials
3.2.2 Equipment and Methods
3.2.3 Specimens Preparation and Inspection Methods
3.3 Results and Discussions
3.3.1 Surface Image and Morphology
3.3.2 Recast Layer and HAZ
3.3.3 Dross
3.3.4 Surface Roughness
3.3.5 Surface Chemical Composition
3.4 Conclusions
References
4 Study on a Digital Inspection Method for Aircraft Tubing Assembly
4.1 Introduction
4.2 Tubing Inspection Method
4.2.1 Analysis of Tubing Assembly Datum
4.2.2 Data Extraction on the Centreline of Tubing
4.2.3 Inspection Datum Fitting
4.2.4 Inspection Datum Fitting
4.3 Application of Tubing Inspection Method for Assembly
4.4 Conclusions
References
5 Two-Step Exothermic Chemical Reaction for Heat Transfer Investigation in a Convective Cylinder
5.1 Introduction
5.2 Mathematical Modelling
5.2.1 Numerical Approach
5.3 Results and Discussion
5.3.1 Effects of Thermo-physical Parameters on Temperature (Unsteady State)
5.3.2 Steady State Heat Transfer Analysis
5.4 Conclusion
References
6 Tool Model Building and Research on Cutting Simulation Experiment of Ti6Al4V
6.1 Introduction
6.2 Milling Finite Element Model
6.2.1 Establishment of Cutting Simulation Model
6.2.2 Meshing
6.2.3 Attribute Definition of Cutting Simulation Model
6.2.4 Modeling of Cutting Force in Cutting Process
6.3 Cutting Simulation and Experimental Analysis of Ti6Al4V
6.3.1 Experimental Condition
6.3.2 Comparison of Chip between Cutting Simulation and Experiment of Ti6Al4V
6.3.3 Analysis of Cutting Force Comparison between Simulation and Experiment
6.3.4 Analysis of Cutting Temperature Comparison between Simulation and Experiment
6.4 Conclusions
References
Preface
Contents
About the Author
1 Controlled and Localized Electrochemical Microfabrication with Moving Sub-Micron Rounded Tip as Tool Electrode
1.1 Introduction
1.2 Method and Materials
1.2.1 Method
1.2.2 Experimental Setup and Materials
1.2.3 Electric Field Simulation
1.3 Results and Discussions
1.3.1 Influences of the Applied Voltage
1.3.2 Influences of Inter-Electrode Gap
1.3.3 Influences of Spherical Tip Diameter of Tool Electrode
1.3.4 Fabrication of High Aspect Ratio Microchannels
1.4 Conclusions
References
2 Peridynamic Simulation for Thermal and Mechanical Behavior of Manufactured Structures with MIG Welding
2.1 Introduction
2.2 Description of Physical Mechanism
2.2.1 Heat Transfer Mechanism
2.2.2 Mechanical Distortion Mechanism with Thermal Effect
2.3 Numerical Simulation of MIG Welding
2.4 Results and Discussions
2.5 Conclusions
References
3 Study on Improving the Performance of Nitinol Cardiovascular Stent by "Fiber Laser-Electropolishing"
3.1 Introduction
3.2 Experimental Materials, Equipment and Methods
3.2.1 Materials
3.2.2 Equipment and Methods
3.2.3 Specimens Preparation and Inspection Methods
3.3 Results and Discussions
3.3.1 Surface Image and Morphology
3.3.2 Recast Layer and HAZ
3.3.3 Dross
3.3.4 Surface Roughness
3.3.5 Surface Chemical Composition
3.4 Conclusions
References
4 Study on a Digital Inspection Method for Aircraft Tubing Assembly
4.1 Introduction
4.2 Tubing Inspection Method
4.2.1 Analysis of Tubing Assembly Datum
4.2.2 Data Extraction on the Centreline of Tubing
4.2.3 Inspection Datum Fitting
4.2.4 Inspection Datum Fitting
4.3 Application of Tubing Inspection Method for Assembly
4.4 Conclusions
References
5 Two-Step Exothermic Chemical Reaction for Heat Transfer Investigation in a Convective Cylinder
5.1 Introduction
5.2 Mathematical Modelling
5.2.1 Numerical Approach
5.3 Results and Discussion
5.3.1 Effects of Thermo-physical Parameters on Temperature (Unsteady State)
5.3.2 Steady State Heat Transfer Analysis
5.4 Conclusion
References
6 Tool Model Building and Research on Cutting Simulation Experiment of Ti6Al4V
6.1 Introduction
6.2 Milling Finite Element Model
6.2.1 Establishment of Cutting Simulation Model
6.2.2 Meshing
6.2.3 Attribute Definition of Cutting Simulation Model
6.2.4 Modeling of Cutting Force in Cutting Process
6.3 Cutting Simulation and Experimental Analysis of Ti6Al4V
6.3.1 Experimental Condition
6.3.2 Comparison of Chip between Cutting Simulation and Experiment of Ti6Al4V
6.3.3 Analysis of Cutting Force Comparison between Simulation and Experiment
6.3.4 Analysis of Cutting Temperature Comparison between Simulation and Experiment
6.4 Conclusions
References