Linked e-resources
Details
Table of Contents
Intro
Preface
Contents
About the Editors
Structural and Thermal Analysis of Composite Wind Turbine Blade for Wind Mill Applications
1 Introduction
2 Modeling of Wind Turbine Blade (WTB)
2.1 Specifications of WTB
3 Analyzing of Wind Turbine Blade (WTB)
3.1 Meshing of WTB
3.2 Boundary Conditions of HAWT Blade and VAWT Blade
4 Result and Discussion
4.1 Structural Analysis for Horizontal Axis Wind Turbine Blade (HAWT)
4.2 Thermal Analysis of HAWT Blade
4.3 Structural Analysis for Vertical Axis Wind Turbine Blade (VAWT)
4.4 Thermal Analysis for VAWT Blade
5 Comparing the Results of HAWT and VAWT Blade
5.1 Comparison of von Mises Stresses Due to Structural Load
5.2 Comparison of von Mises Stresses Due to Thermal Load
5.3 Comparison of Total Heat Flux Due to Thermal Load
6 Conclusion
References
The Effect of Novel Cryogenic Treatment in the Microstructure Analysis of Al 6101 Closed-Cell Foam
1 Introduction
2 Investigational Facts
2.1 Selection of Material
2.2 Specimen Preparation
2.3 Heat Treatment (HT)
2.4 Cryogenic Treatment (CT)
2.5 Cryogenic Heat Treatment (CHT)
2.6 Surface Characterization
3 Results and Discussion
3.1 Microstructure and Material Composition Analysis
3.2 XRD Analysis
4 Conclusions
References
Development of Toxic Gas Monitoring and Alarm System
1 Introduction
2 Objectives
3 Problem Definition and Methodology
4 Design of Gas Monitoring Alarm System
4.1 Hardware Requirements
4.2 Power Supply
5 Online Publication in SpringerLink
6 Open Conclusions and Future Scope of Work
References
Predictive Modeling of Surface Roughness for Turning of Al-6061 Using Artificial Neural Network Model
1 Introduction
2 Experimental Work
3 Results and Discussions-Experiments
3.1 Cutting Force
3.2 Temperature
3.3 Surface Roughness
4 Prediction Models
4.1 Multiple Regression
4.2 ANN
5 Model Validation
5.1 Multiple Regression Model
5.2 ANN Model
5.3 Model Comparison
6 Conclusions
Appendix
References
Dynamic Supporting Wheels for Two-Wheeler Stability
1 Introduction
2 Methodology
2.1 Actuation Control Module
2.2 Material Analysis
3 Program Coding
4 Formula Derivation and Construction of Supporting Wheels
4.1 Calculation for DC Motor
4.2 Dimensions of the Component
5 Result and Discussion
5.1 Without Load (at a Steady State of Rest in Side Stands)
5.2 Adding a Rider (First Step to Exerting Force on the Vehicle)
5.3 Adding a Pillion (Pillion Weight Amounts to the Additional Unsprung Mass) and Hence Reduces the Effective Distance Between the Support Mounting and the Ground
6 Conclusion
References
Microstructural Evolution, Phase Formation and Mechanical Behaviour of Al 7017 Alloy Produced by Powder Metallurgy (P/M) Technique
1 Introduction
2 Materials and Methods
Preface
Contents
About the Editors
Structural and Thermal Analysis of Composite Wind Turbine Blade for Wind Mill Applications
1 Introduction
2 Modeling of Wind Turbine Blade (WTB)
2.1 Specifications of WTB
3 Analyzing of Wind Turbine Blade (WTB)
3.1 Meshing of WTB
3.2 Boundary Conditions of HAWT Blade and VAWT Blade
4 Result and Discussion
4.1 Structural Analysis for Horizontal Axis Wind Turbine Blade (HAWT)
4.2 Thermal Analysis of HAWT Blade
4.3 Structural Analysis for Vertical Axis Wind Turbine Blade (VAWT)
4.4 Thermal Analysis for VAWT Blade
5 Comparing the Results of HAWT and VAWT Blade
5.1 Comparison of von Mises Stresses Due to Structural Load
5.2 Comparison of von Mises Stresses Due to Thermal Load
5.3 Comparison of Total Heat Flux Due to Thermal Load
6 Conclusion
References
The Effect of Novel Cryogenic Treatment in the Microstructure Analysis of Al 6101 Closed-Cell Foam
1 Introduction
2 Investigational Facts
2.1 Selection of Material
2.2 Specimen Preparation
2.3 Heat Treatment (HT)
2.4 Cryogenic Treatment (CT)
2.5 Cryogenic Heat Treatment (CHT)
2.6 Surface Characterization
3 Results and Discussion
3.1 Microstructure and Material Composition Analysis
3.2 XRD Analysis
4 Conclusions
References
Development of Toxic Gas Monitoring and Alarm System
1 Introduction
2 Objectives
3 Problem Definition and Methodology
4 Design of Gas Monitoring Alarm System
4.1 Hardware Requirements
4.2 Power Supply
5 Online Publication in SpringerLink
6 Open Conclusions and Future Scope of Work
References
Predictive Modeling of Surface Roughness for Turning of Al-6061 Using Artificial Neural Network Model
1 Introduction
2 Experimental Work
3 Results and Discussions-Experiments
3.1 Cutting Force
3.2 Temperature
3.3 Surface Roughness
4 Prediction Models
4.1 Multiple Regression
4.2 ANN
5 Model Validation
5.1 Multiple Regression Model
5.2 ANN Model
5.3 Model Comparison
6 Conclusions
Appendix
References
Dynamic Supporting Wheels for Two-Wheeler Stability
1 Introduction
2 Methodology
2.1 Actuation Control Module
2.2 Material Analysis
3 Program Coding
4 Formula Derivation and Construction of Supporting Wheels
4.1 Calculation for DC Motor
4.2 Dimensions of the Component
5 Result and Discussion
5.1 Without Load (at a Steady State of Rest in Side Stands)
5.2 Adding a Rider (First Step to Exerting Force on the Vehicle)
5.3 Adding a Pillion (Pillion Weight Amounts to the Additional Unsprung Mass) and Hence Reduces the Effective Distance Between the Support Mounting and the Ground
6 Conclusion
References
Microstructural Evolution, Phase Formation and Mechanical Behaviour of Al 7017 Alloy Produced by Powder Metallurgy (P/M) Technique
1 Introduction
2 Materials and Methods