Intro
Introduction
Contents
About the Editors
Conservation Planning of Road Construction Raw Materials
Satara a Case Study
1 Introduction
2 Literature Survey
3 Field and Laboratory Investigation
3.1 Collection of Waste and Conservative Materials from the Study Area
3.2 Experimental Setup and Laboratory Investigation
4 Analytical Investigations
5 Results and Discussion
6 Conclusions
References
Critical Pavement Response Analysis Under Overloading for Design of Low Volume Rural Roads
1 Introduction
2 Literature Review
3 Methodology

3.1 Field Investigation Survey
3.2 Input Parameters for Varying Subgrade
3.3 Input Parameters for Varying Pressure Intensities
3.4 Creating Design Charts
4 Results and Discussion
4.1 Analysis of Varying Subgrade
4.2 Analysis for Varying Pressure Intensities
4.3 Design Charts
5 Conclusions
References
Impulse Compaction
1 Introduction
2 Historic Development of Impulse Compaction
3 Technical Description of Impulse Compaction
3.1 Components and Equipment of an Impulse Compactor
3.2 Additional Attachments for Impulse Compactor

3.3 Other Applications and Combinations
3.4 Predrilled Stone Columns
4 Limits of Standard Impulse Compaction
5 Documentation and Quality Control
6 Case Studies (from Construction Reports)
6.1 Breuninger Storage Hall in Sachsenheim, Germany
6.2 Jaguar Europe Center in Nitra. Slovakia
6.3 R76 Express Road in Hungary
6.4 Yogyakarta Airport
6.5 Runway Repair at Palu Airport After an Earthquake
6.6 Flood Protection Dam
7 Discussion/Conclusions
References
A Preliminary Laboratory Study of Fatigue Performance of Geogrid-Reinforced Asphalt Beam
1 Introduction

2 Methodology
2.1 Materials
2.2 Test Methods
3 Results and Discussions
3.1 Loading Behavior of Unreinforced Asphalt Beams
3.2 Effect of Geogrid Strength on Fatigue Life
4 Summary
References
Low Temperature Crack Resistance of Recycled Asphalt Mixture with Waste Frying Oil Based on Semi-circular Bending Test
1 Introduction
2 Test Raw Materials
2.1 Waste Frying Oil Rejuvenator
2.2 Rap
2.3 Virgin Asphalt and Virgin Aggregate
3 Effects of Waste Frying Oil on Physical Properties of Recycled Asphalt

4 Design of Mixture Ratio of Waste Frying Oil Recycled Asphalt Mixture
5 Semicircular Bending Test of Recycled Asphalt Mixture from Waste Frying Oil
5.1 Semi-circular Bending Test Method
5.2 Analyses
6 Conclusions
References
Viability Assessment of the Use of Ground Tire Rubber (GTR) as a Modifier in Asphalt Binders
1 Introduction
2 Objectives
3 Materials Selection and Mixing Protocol
3.1 Materials Selection
3.2 GTR-Modified Asphalt Binder Preparation
4 Test Results
4.1 Chemical Analysis
4.2 Micro-structure Analysis
4.3 Mechanistic Performance Analysis