Linked e-resources
Details
Table of Contents
Review of the Current Trend on Autonomous Vehicles in Developing Countries
Review of Current Trends in Marine Energy on Large Tidal Current Turbine
The National Contingency Plan Towards the Oil Spill Preparation and Response in Malaysia
Simulation of Three-Point Bending Sandwich Composite Panel Through Finite Element Analysis
The uses of Unmanned Aerial Vehicle (UAV) for Slope Mapping with the Determination of Potential Slope Hazard
Tensile Strength: +45 Isotropic FRP Laminate with Different Universal Testing Machine
Instruments utilized in Short Sea Shipping Research: A Review
Issues on Palm Oil with Regard to The Revised MARPOL Annex II. A Re-view
Assessing The Efficacy of The Advance Transfer Technique in Calculating Wheel Over Point Through Simulation Study
Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membrane: Effect of Evaporation Time on Blend Membrane Characteristics
Influence of Deadrise on the Dynamic Instability of A 14 Metres Custom Boat in Regular Waves
The Implication of Container Floating Terminal on The Efficiency of Port Klangs Terminal Operations and Domestic Freight Forwarding Industry
The Optical Properties of Polyvinyl Alcohol (PVA), Phosphorylated Polyvinyl Alcohol (PPVA) and Phosphorylated Polyvinyl Alcohol Aluminum Phosphate (PPVA-AlPO4) - Nanocomposite. Effect of Phosphate Groups
Tensile and corrosion resistance studies of MXenes/nanocomposites - A Review
Effect of Nanofillers on The Mechanical Properties of Epoxy Nanocomposites
The degradation of mechanical properties caused by acetone chemical treatment on 3D-printed PLA-carbon fibre composites
Tensile and Morphology Analysis of Oil Palm Trunk (OPT) Specimen Re-inforced Epoxy Fabricated via Vacuum Assisted Resin Transfer Moulding (VARTM)
The Analysis of Container Terminal Throughput Using ARIMA and SARIMA
Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel
Examination Table Innovation Static into Dynamic which Ergonomic using Anthropometry Approach and Rational Method.
Review of Current Trends in Marine Energy on Large Tidal Current Turbine
The National Contingency Plan Towards the Oil Spill Preparation and Response in Malaysia
Simulation of Three-Point Bending Sandwich Composite Panel Through Finite Element Analysis
The uses of Unmanned Aerial Vehicle (UAV) for Slope Mapping with the Determination of Potential Slope Hazard
Tensile Strength: +45 Isotropic FRP Laminate with Different Universal Testing Machine
Instruments utilized in Short Sea Shipping Research: A Review
Issues on Palm Oil with Regard to The Revised MARPOL Annex II. A Re-view
Assessing The Efficacy of The Advance Transfer Technique in Calculating Wheel Over Point Through Simulation Study
Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membrane: Effect of Evaporation Time on Blend Membrane Characteristics
Influence of Deadrise on the Dynamic Instability of A 14 Metres Custom Boat in Regular Waves
The Implication of Container Floating Terminal on The Efficiency of Port Klangs Terminal Operations and Domestic Freight Forwarding Industry
The Optical Properties of Polyvinyl Alcohol (PVA), Phosphorylated Polyvinyl Alcohol (PPVA) and Phosphorylated Polyvinyl Alcohol Aluminum Phosphate (PPVA-AlPO4) - Nanocomposite. Effect of Phosphate Groups
Tensile and corrosion resistance studies of MXenes/nanocomposites - A Review
Effect of Nanofillers on The Mechanical Properties of Epoxy Nanocomposites
The degradation of mechanical properties caused by acetone chemical treatment on 3D-printed PLA-carbon fibre composites
Tensile and Morphology Analysis of Oil Palm Trunk (OPT) Specimen Re-inforced Epoxy Fabricated via Vacuum Assisted Resin Transfer Moulding (VARTM)
The Analysis of Container Terminal Throughput Using ARIMA and SARIMA
Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel
Examination Table Innovation Static into Dynamic which Ergonomic using Anthropometry Approach and Rational Method.