Integrated computer technologies in mechanical engineering -- 2021 [electronic resource] : synergetic engineering / Mykola Nechyporuk, Vladimir Pavlikov, Dmitriy Kritskiy, editors.

Intro
Preface
International Scientific and Technical Conference
General Schedule (GMT+3)
ICTM-2021 Committees
Steering Committee
Honorary Chair
Executive Chair
Program Committee
Organizing Team
Publication Chairs
Members
The Official Language of the ICTM-2021 is English
October 28, 2021, Thursday
October 29, 2021, Friday
Contents
Aerospace Engineering
Stress Distribution in the Eccentrically Loaded Lapped Adhesive Joint. An Analytical Model
1 Introduction
2 Problem Formulation
3 Constructing the Solution
4 Model Problem

5 Conclusions
References
Assessment of Error of the Experimental Determination of Interlaminar Shear Strength
1 Introduction
2 Literature Review
3 Research Methodology
4 Results
5 Conclusions
References
Tensile Stress as a Factor of Deformation and Failure of Thin Films and Coatings
1 Introduction
2 Edge Delamination of Films from Substrate
3 Film Cracking
4 Conclusion
References
Stress-Strain State of a Double Lap Joint of Circular Form. Axisymmetric Model
1 Introduction
2 Problem Statement
3 Constructing the Solution

3.1 Adhesive Joint Area
3.2 Areas Beyond the Adhesive Joint
3.3 Boundary Conditions
4 Model Problem
5 Conclusions
References
Methodology for Calculating the Productivity of Electrochemical Machining in Stationary Electrolyte
1 Introduction
2 Methodology for Calculating the Productivity of the ECM
2.1 Procedure for the Experiment
3 Conclusions
References
Investigation of the Influence of Crystallization Energy on the Size of Nanostructures During Copper Ion-Plasma Treatment
1 Introduction
2 The Main Part
2.1 Research Methodology

3 The Results of Calculations and Their Discussion
4 Conclusions
References
Synthesis of a Launch Trajectory of Aircraft Optimal in the Minimum Fuel Consumption Based on Sufficient Conditions of Optimal Control
1 Introduction
2 Application of the V.F. Krotov-M.M. Khrustalev Method for Finding the Estimated Launch Trajectory
3 Modeling the Method of V.F. Krotov-M.M. Khrustalev for the Synthesis of the Estimated Launch-Acceleration Trajectory
4 Conclusion
References
Analysis of Stress Development Mechanisms in the Coating/Substrate System
1 Introduction

2 Stress of Nonequilibrium in Epitaxial Coatings
3 Internal Stresses in Polycrystalline Coatings
4 Factors Influencing the Occurrence of Internal Stresses in Thin Coatings
5 Stresses that Develop in Thin Coatings Under External Influences
6 Conclusions
References
The Effect of Vertical Wind Turbines Position Pattern on Their Aerodynamic Characteristics
1 Introduction
2 Analytical Model
3 Conclusions and Future Work
References
Simulation of Aircraft Motion in a Corkscrew Taking into Account Nonlinear Effects of Rotation
1 Introduction
2 Problem Statement