Part 1: Metals
1. Microstructure and strength properties of the Mg-Zn-Ca-Er alloy produced by spark plasma sintering (SPS) method
Part 2: Composites
2. Coir and Hop fibres: Tensile characterization and comparison between fibres from distinct climates
3. Simulation strategies for dynamic and static behaviour of composite beams
4. The design of a cementitious material modified with the synergistic addition of sodium silicate and fine aggregate sourced from granite waste in order to obtain a mortar with low capillary suction
5. The production process of foamed geopolymers with the use of various foaming agents
Part 3: Additive manufacturing
6. Mechanical and physical characterization of parts manufactured by 3D printing
7. Potential use of sugarcane bagasse ash in cementitious mortars for 3D printing
Part 4:Design
8. Experimental bench for the analysis of belt deformation in belt-pulley systems by Digital Image Correlation
Part 5: Forming
9. The effect of rubber hardness on the channel depth of the metallic bipolar plates fabricated by rubber pad forming
Part 6: Joining
10. Numerical investigation of the influence of a movable die base on joint formation in semi-tubular self-piercing riveting
11. Finite element analysis to determine pullout strength of fixation around large defect site in femur reconstruction surgery.