Intro
Foreword
Preface
Contents
About the Editor
1 Introduction
1.1 Background
1.2 Literature Review of Machining Induced Residual Stress
1.2.1 Experimental Efforts in Residual Stress
1.2.2 Finite Element Research of the Residual Stress
1.2.3 Analytical Modeling of Residual Stress
1.3 Literature Review of Minimum Quantity Lubrication Machining
1.3.1 Literature Review of MQL Experimental Investigation
1.3.2 Literature Review of MQL Analytical Modeling
1.4 Motivation of the Research
1.5 Arrangement of Chapter
References

2 The Effects of MQL on Tribological Attributes in Machining
2.1 Penetration Mechanism of Cutting Medium
2.1.1 Penetration Mechanism of Convectional Flood Cooling Machining
2.1.2 Penetration Mechanism of MQL Machining
2.2 Lubrication Effect of MQL
2.2.1 Lubrication Mechanism of MQL
2.2.2 Friction Coefficient in MQL
2.3 Cooling Effect of MQL
2.3.1 Cooling Mechanism of MQL
2.3.2 Heat Transfer Coefficient in MQL
2.4 Summary
References
3 Force-Temperature Coupled Prediction Model
3.1 Predictive Modeling of Cutting Force Based on Orthogonal Cutting

3.1.1 Chip Formation Force Model
3.1.2 Plowing Force Model
3.2 Predictive Modeling of Cutting Temperature
3.2.1 Temperature Model in Workpiece
3.2.2 Temperature Model in Chip
3.2.3 Temperature Model in Tool
3.3 Force-Temperature Coupled Model
3.3.1 Modified Oxley's Predictive Model
3.3.2 Iterative Coupling Model of Cutting Force and Cutting Temperature
3.4 Comparison of Cutting Force Prediction Models
3.4.1 Comparison of Model Inputs and Application Scope
3.4.2 Comparison of Predicted Cutting Force
3.5 Summary
References

4 Residual Stress Model in MQL Machining
4.1 Prediction of Stress Distribution
4.1.1 Stress Due to Mechanical Load
4.1.2 Stress Due to Thermal Load
4.1.3 Stress Analysis
4.2 Residual Stress Prediction Model
4.2.1 Model Criteria
4.2.2 Load History
4.2.3 Relax Process
4.3 Comparison of Residual Stress Prediction Models
4.3.1 Comparison of Assumption of Two Prediction Models
4.3.2 Comparison of Results of the Prediction Models
4.4 Summary
References
5 Experimental Validation by Orthogonal Cutting of AISI 4130 Alloy
5.1 Experimental Method

5.1.1 Design of the Workpiece
5.1.2 Design of the Setup
5.1.3 Design of the Measurement
5.2 Analysis of Experimental Results and Model Verification
5.2.1 Determination of the Parameter in the Prediction Model
5.2.2 Validation of Cutting Force
5.2.3 Validation of Cutting Temperature
5.2.4 Validation of Residual Stress Prediction Model
5.3 Summary
References
6 Sensitivity Analysis of Machined Residual Stress in MQL Machining
6.1 Selection of the Parameters
6.2 Influence of MQL Parameters
6.2.1 Influence of Boundary Lubrication Film Thickness