Linked e-resources
Details
Table of Contents
Intro
Contents
Sustainable and Optimal Rolling of Electric Vehicle on Roadways with Better Implementation
1 Introduction
2 Problem Statement and Formulation
3 Methodology
4 Mathematical Evaluation
5 Result Analysis
5.1 Current Scenario and Progress
5.2 Implementation and Target
5.3 Drawbacks in the Development
5.4 Environmental Sustainability
5.5 Economical Sustainability
6 Conclusion
References
A Review on Recent Advanced Three-Phase PLLs for Grid-Integrated Distributed Power Generation Systems Under Adverse Grid Conditions
1 Introduction
2.1 Plant Description
2.2 Proposed Methodology
3 Plant Performance Evaluation
3.1 Final Yield (FY)
3.2 Reference Yield (RY)
3.3 Performance Ratio (PR)
3.4 Capacity Factor (CF)
3.5 Array Yield (AY)
3.6 Array Capture Losses (ACL)
3.7 Conversion Losses (CL)
4 Analysis and Comparison of Obtained Results
4.1 Analysis of the Present Plant
4.2 Effect of Wind Speed and Ambient Temperature on Plant's Performance
4.3 Comparison with Other Plants
5 Conclusion
References
Green Energy in West Bengal, India: Status, Scope, and Future Challenges
1 Introduction
2 Traditional Power Scenarios
3 Present Status of Green Energy
3.1 Solar Energy
3.2 Wind Energy
3.3 Hydroelectric Energy
3.4 Biogas and Biomass Energy
3.5 Green Transportation
4 Resource Potential
5 Current Policy and Projects
6 Challenges
7 Conclusions and Remarks
References
Impact of Performance Parameters on the Efficiency of Cu2SnS3 (CTS)/Si Tandem Solar Cell by SCAPS-1D
1 Introduction
2 Device Structure and Simulation Methodology
3 Results and Discussion
3.1 Effect of n-Si Layer Thickness
3.2 Effect of p-Si Layer Thickness
3.3 Effect of CTS Layer Thickness
3.4 I-V Characteristics
3.5 Effect of CTS Carrier Concentration
3.6 Effect of Operating Temperature
3.7 Simulation Results
4 Conclusion
References
Expansion of the Burners Structure to Boost up the Ecological Properties of an Average Capacity Boiler "E-270-13.73-560"
1 Introduction
2 Methods and Characteristics of Research
3 Designing Steam Boiler Model E-270-13.73-560 by Using the SigmaFlame Software Package Research Analysis Appliance
4 The Analysis and Discussion of Numerical Results of the Designing Furnace Process
Contents
Sustainable and Optimal Rolling of Electric Vehicle on Roadways with Better Implementation
1 Introduction
2 Problem Statement and Formulation
3 Methodology
4 Mathematical Evaluation
5 Result Analysis
5.1 Current Scenario and Progress
5.2 Implementation and Target
5.3 Drawbacks in the Development
5.4 Environmental Sustainability
5.5 Economical Sustainability
6 Conclusion
References
A Review on Recent Advanced Three-Phase PLLs for Grid-Integrated Distributed Power Generation Systems Under Adverse Grid Conditions
1 Introduction
2.1 Plant Description
2.2 Proposed Methodology
3 Plant Performance Evaluation
3.1 Final Yield (FY)
3.2 Reference Yield (RY)
3.3 Performance Ratio (PR)
3.4 Capacity Factor (CF)
3.5 Array Yield (AY)
3.6 Array Capture Losses (ACL)
3.7 Conversion Losses (CL)
4 Analysis and Comparison of Obtained Results
4.1 Analysis of the Present Plant
4.2 Effect of Wind Speed and Ambient Temperature on Plant's Performance
4.3 Comparison with Other Plants
5 Conclusion
References
Green Energy in West Bengal, India: Status, Scope, and Future Challenges
1 Introduction
2 Traditional Power Scenarios
3 Present Status of Green Energy
3.1 Solar Energy
3.2 Wind Energy
3.3 Hydroelectric Energy
3.4 Biogas and Biomass Energy
3.5 Green Transportation
4 Resource Potential
5 Current Policy and Projects
6 Challenges
7 Conclusions and Remarks
References
Impact of Performance Parameters on the Efficiency of Cu2SnS3 (CTS)/Si Tandem Solar Cell by SCAPS-1D
1 Introduction
2 Device Structure and Simulation Methodology
3 Results and Discussion
3.1 Effect of n-Si Layer Thickness
3.2 Effect of p-Si Layer Thickness
3.3 Effect of CTS Layer Thickness
3.4 I-V Characteristics
3.5 Effect of CTS Carrier Concentration
3.6 Effect of Operating Temperature
3.7 Simulation Results
4 Conclusion
References
Expansion of the Burners Structure to Boost up the Ecological Properties of an Average Capacity Boiler "E-270-13.73-560"
1 Introduction
2 Methods and Characteristics of Research
3 Designing Steam Boiler Model E-270-13.73-560 by Using the SigmaFlame Software Package Research Analysis Appliance
4 The Analysis and Discussion of Numerical Results of the Designing Furnace Process