Intro
Preface
Contents
RILEM Publications
RILEM Proceedings (PRO)
RILEM Reports (REP)
New Materials and Process Technology
Mechanical Performance of Strain Hardening Limestone Calcined Clay Cementitious Composites (SHLC4) Subject to Wet-Dry Cycles
1 Introduction
2 Experimental Program
2.1 Materials and Composition
2.2 Specimen Preparation and Testing Configuration
3 Results and Discussion
3.1 Uniaxial Tension Test of Reference SHLC4
3.2 Autogenous Healing in SHLC4
4 Conclusion
References

The Use of Ultra-high Volume of Lime Stone Calcine Clay to Produce Basalt Fiber Reinforced Strain Hardening Cementitious Composites
1 Introduction
2 Materials and Testing
2.1 Constituents
2.2 Specimen Preparation
2.3 Testing Details
3 Results and Discussions
3.1 Fiber Properties
3.2 Compressive Strength
3.3 Pullout Results
3.4 Tensile Test Result
3.5 Durability Assessment
4 Conclusions
References
Utilization of Artificial Geopolymer Aggregates in High-Strength Engineered Cementitious Composites (HS-ECC)
1 Introduction
2 Experimental Program

2.1 Raw Materials
2.2 GPA Production
2.3 ECC Production
2.4 Testing Methods
3 Mechanical Properties
3.1 Tensile Performance
3.2 Compressive Strength
3.3 Comparison of Short- and Long-Term Overall Performance
4 Ductility Enhancement Mechanism of GPA in ECC
5 Conclusions
References
Engineered Geopolymer Composites (EGC) with Ultra-high Strength and Ductility
1 Introduction
2 Materials and Test Program
2.1 Raw Materials
2.2 Preparation of UHSD-EGC
2.3 Testing Methods
3 Results and Discussions
3.1 Compressive Strength
3.2 Tensile Performance

3.3 Strain Energy Density Under Tension
3.4 BSE Results of Matrix
4 Conclusions
References
Developing CO2-Sequstrating Strain-Hardening Magnesia-Based Composite (SHMC) with Hybrid Synthetic-Natural Fibers
1 Introduction
2 Experimental Programs
2.1 Materials
2.2 Single Fiber Pull-Out Test
2.3 Tensile Test
3 Results and Discussions
4 Conclusions
References
Fundamental Study on Mechanical Performances of FRCC Using Polypropylene Nanofibers
1 Introduction
2 Outline of the Experiment
2.1 Materials
2.2 Specimen Preparation and Curing

2.3 Three-Point Bending Test
2.4 Compressive Strength Test
2.5 SEM Observation
3 Results and Discussion
3.1 Mixing and Dispersion Methods of Nanofibers
3.2 Single Use of PP Nanofibers
3.3 Combined Use of PP Nanofibers with PVA Fibers
4 Conclusion
References
The Use of Strain Hardening Natural Fabric Reinforced Cement Based Composite Systems for Structural Applications
1 Introduction
2 Materials and Methods
3 Results and Discussions
4 Conclusions
References