Intro
Preface
Contents
Instrumentation, Measure and Metrology
Estimation of the Cylindricity Defect on CMM by Coupling the Genetic Algorithm and the Interior Points Method
1 Introduction
2 Mathematical Modelling of Cylindricity
3 Resolution Method
3.1 Interior Points Method
3.2 Hybrid Algorithm
4 Results
4.1 Data Set cyl20
4.2 Data Set cyl1
4.3 Data Set cyl2
5 Conclusion
References
Influence of the Adjustment Criterion and the Probing Strategy on the Measurement of the Cylindricity Defect
1 Introduction

2 Adjustment Criteria in Coordinate Metrology
2.1 Definitions
2.2 Least Squares Criterion
2.3 Minimum Zone Criterion
3 Strategies for Measuring Cylindricity
4 Methodology
5 Results and Discussion
6 Conclusion
References
Evaluation of the Performance of the Calibration Method by an Inter-laboratory Comparison
1 Introduction
2 Identification of the Correction Matrix for Calibration of the Coordinate Measuring Machines
2.1 Calculation of the Uncertainty of the Correction Matrix
2.2 Measurements and Results of Identification

3 Evaluation of Performance by Inter-laboratories Comparison
4 Declaration of Conformity with Risk
5 Conclusion
References
Development of PPP Virtual Machine for the Study of the CMM Performance
1 Introduction
2 Position Error of the Stylus Tip
3 Measurement Error in the Workspace
4 Virtual Machine and Application
5 Example of Measurement Result
6 Conclusion
References
Statistical Analysis of Three-Dimensional Tolerances by Integrating Form Defects Using the Jacobian Torsor Model
1 Introduction
2 Model of the Jacobian Torsor
3 Numerical Example

3.1 Statistical Tolerancing Without Taking into Account Flatness Defect
3.2 Tolerancing by Taking into Account Flatness Defect
3.3 Calculation of the non-conformity rate %R
4 Conclusion
References
Industrial Engineering and Digital Factory
Environmental Benefits of Resources Pooling Applied on Hydrocarbon Supply Chain
1 Introduction and Context Study
2 Literature Review
3 Problematic Description
4 Methodology for Calculating CO2 Emissions
5 Simulation
5.1 Case Study
6 Results and Discussions
7 Conclusion
References

Lean, Green, Resilient Supply Chain and Sustainable Performance: Practices and Measruesements Review
1 Introduction
2 Literature Review
2.1 Lean, Green and Resilience Paradigms
2.2 Lean, Green, Resilience and Sustainable Performance
3 Research Methodology
4 Findings and Discussion
5 Conclusion
Appendix
References
Recent Development Techniques on Digital Twins for Manufacturing: State of the Art
1 Introduction
2 State of the Art: Digital Twin in Manufacturing
2.1 Physical Layer
2.2 Computing Layer
2.3 Network Layer
3 Outcomes of the Literature Review