Intro
Foreword
Preface
Contents
About the Editors
Heat Transfer and Fluid Flow
Performance of a Single-Turn Pulsating Heat Pipe at Varying Gravity
1 Introduction
2 Physical Model and Governing Equations
3 Results and Discussions
3.1 Flow Velocity
3.2 Heat Flow Rate
3.3 Heat Transfer Coefficient
4 Conclusion
References
Free Convection from Isothermally Heated Hollow Tube with Annular Fins
1 Introduction
2 Problem Description
3 Numerical Methodology
4 Results and Discussion
4.1 Effect of L/D on Thermal Plume

4.2 Effect of S/L on Thermal Plume
4.3 Effect of Ra on Thermal Plume
4.4 Variation of Qnet
4.5 Variation of Nunet
4.6 Behaviour of Fluid Flow Plume
5 Conclusion
References
Chaotic Dynamics of Fluid Conveying Pipe
1 Introduction
2 Analytical Model
3 Galerkin Discretization
4 Result and Discussion
5 Conclusion
References
Study of Flow Distribution in the Falling Film Evaporator Manifold
1 Introduction
2 Limitations of the Theory Proposed
2.1 Uniform Flow Distribution Aspects
2.2 Impact of E (Length of Header to Diameter of the Header)

2.3 Impact of Opening Ratio M (Summation of All Outlet Area to the Area of Manifold)
2.4 Impact of Friction
3 Conclusion
References
Effect of Core Geometrical Characteristics on Performance and Pressure Drop of Rotary Regenerator
1 Introduction
2 Methodology
3 Results and Discussions
3.1 Effect of Length of Regenerator Core
3.2 Effect of Diameter of Regenerator Core
3.3 Effect of Separator Gap
4 Conclusions
References
CFD Analysis of Heat Transfer Coefficient and Pressure Drop in a Shell and Tube Heat Exchanger for Various Baffle Angles
1 Introduction

2 Design and Analysis
3 Results and Discussions
4 Conclusion
References
A Study on Indoor Air Quality of Air-Conditioning System Using Duct Insulation and Filters for Industrial Applications
1 Introduction
2 Methodology and Modelling
2.1 Numerical Values Obtained for Heat Gain Through Ducts Using ANSYS-15
3 Results and Discussions
3.1 Solution Obtained for Steady-State Thermal Condition Using ANSYS-15
3.2 Fluid Fluent Results
3.3 Steady State Thermal Results with Filter
3.4 Transient Thermal Results
4 Conclusion
References

Optimization Applications in Engine
Maximization of Compressive Strength of Fused Deposition Modeled Antibacterial Polylactic Acid by Taguchi Method
1 Introduction
2 Materials and Methods
3 Result and Discussions
3.1 Maximization of Compressive Strength
4 Conclusions
References
Analysis of Drivers and Barriers in Green Supply Chain Management Using Fuzzy AHP and Fuzzy TOPSIS Approach
1 Introduction
2 Experimental Program
2.1 Consideration of the Manufacturing Industry
2.2 Focused Group Discussion
2.3 Application of F_AHP Approach