Intro
Preface
Acknowledgements
Contents
About the Editors
The Chip Formation Mechanism for the Machining of the EN8 Unalloyed Steel
1 Introduction
2 Experimental Procedure
3 Results
4 Discussion
4.1 The VMS and Chip Type
4.2 The Study Using SEM
5 Conclusions
References
Parameter Optimization for Titanium Superalloy for Electrical Discharge Machining Using Advanced Optimization Techniques
1 Introduction
2 Experimental Details
3 Jaya Algorithm
4 Optimization
5 Results and Discussion
6 Conclusion
References

A Deep Review: Techniques, Findings and Limitations of Traffic Flow Prediction Using Machine Learning
1 Introduction
2 Literature Review
3 Comparative Analysis of Deep Learning Architectures
4 Conclusion, Limitations, and Future Work
References
Effect of Normalizing Followed by Deep Cryogenic Soaking on Mechanical Properties of P91 Martensitic Steel
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 X-Ray Diffraction Spectra for Normalized and Normalized Followed by Cryogenic Soaking Samples

3.2 Variation of Volumetric % of RA and Hardness with ATT
3.3 Optimization of ATT
4 Conclusion
References
Effect of Tempering Variables on Mechanical Properties of P91 Martensitic Steel and Determination of Hollomon-Jaffe Parameter
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 X-Ray Diffraction Spectra in Tempering
3.2 Variation in Hardness and Impact Toughness in Tempering
3.3 Hollomon-Jaffe Parameter
4 Conclusion
References

Influence of Multi-pass Friction Stir Processing on Microhardness and Wear Properties of AA2014/SiC-CNT Hybrid Surface Composites
1 Introduction
2 Methodology and Materials
3 Methodology
4 Results and Discussion
5 Conclusion
References
Experimental and Numerical Analysis of Strength Characterisation of Concrete with Recycled Concrete Aggregate: A Case Study
1 Introduction
1.1 Recycled Concrete Aggregate
1.2 Improvement of Properties of RCA
1.3 Applications in Construction Activities
1.4 Design Mix of RAC
2 Research Significance and Objectives

3 Experimental Programme
3.1 Materials
3.2 Recycled Concrete Aggregate
3.3 Design Mix
3.4 Casting and Curing of Trial Samples
4 Result and Discussion
5 Conclusion and Future Scope
References
Effect of Nano-TiO2 Content (wt.%) on Hardness of Epoxy Polymer Matrix Nanocomposites
1 Introduction
2 Materials and Methods
3 Results and Discussions
3.1 XRD Analysis
3.2 SEM-EDS Analysis
3.3 FTIR Analysis
3.4 Hardness
4 Conclusions
References
Development and Characterization of Nano-SiO2-Enhanced Polymer Nanocomposites
1 Introduction