Intro
Preface
Contents
Chapter 1: Energy Efficiency in the Drilling of Hollow Parts: A Sample Application
1.1 Introduction
1.2 Manufacturing Process and Operations
1.3 Materials and Method
1.4 Results
1.5 Conclusions
References
Chapter 2: An Energy Productivity Analysis in the Scope of the Pressure Collector System that Has Been Designed with the Hydro...
2.1 Introduction
2.2 The Modelling of the Hydrophore Systems
2.3 Result and Discussion
2.4 Conclusion
References
Chapter 3: Industrial Energy Efficiency Lessons from Past Experience for Today and Tomorrow
3.1 Introduction
3.2 Industrial Systems and Equipment
3.2.1 Compressed Air Systems
3.2.2 Electrical Machines
3.2.3 Lighting
3.2.4 Power Quality
3.3 Conclusion
References
Chapter 4: A Brief Comparison of Risk Analysis Methods for Fuel Cell Ships
4.1 Introduction
4.2 PEM Fuel Cells and Risk Assessment Methods
4.3 Discussion
4.4 Conclusion
References
Chapter 5: Investigation of the Gap Between the Predicted Mean Vote (PMV) and the Actual Vote (AMV) of the Students in CSB Cli...
5.1 Introduction
5.2 Methodology
5.3 Results and Discussion
5.4 Conclusions
References
Chapter 6: Development of an Energy Efficiency Project for a Glass Production Plant
6.1 Introduction
6.2 Methodology and Results
6.2.1 Renovation of Lightning System
6.2.2 Renovation of Electric Motors
6.2.3 Renovation of Pumps
6.2.4 Renovation of Cooling Fans
6.3 Conclusions
References
Chapter 7: Design of a Sustainable Combined Power Plant with sCO2-BC and Ejector Cooling System Driven by Solar Energy
7.1 Introduction
7.2 System Description
7.3 Mathematical Modeling
7.4 Results and Discussion
7.5 Conclusion
References.

Chapter 8: Evaluation of the Thermodynamic Performance Analysis of Geothermal Energy-Assisted Combined Cycle for Power, Heatin...
8.1 Introduction
8.2 Modeling System Description
8.3 Analysis
8.4 Results and Discussion
8.5 Conclusion
References
Chapter 9: A Bow-Tie Analysis for the Navigational Safety and Environmental Sustainability on the 1915 Çanakkale Bridge
9.1 Introduction
9.2 Methodology
9.3 Results and Discussions
9.4 Conclusion
References
Chapter 10: Evaluation of Combustion Characteristics in a Common Rail Diesel Engine Fueled Butanol/N-Heptane/Diesel Blends
10.1 Introduction
10.2 Another First-Level Paragraph
10.3 Result and Discussion
10.3.1 Cylinder Gas Pressure
10.3.2 Ignition Delay and Combustion Duration
10.3.3 NO Emission
10.4 Conclusion
References
Chapter 11: Co-combustion of Sewage Sludge with Eco-friendly Fuels to Reduce CO2 Emissions in Flue Gas
11.1 Introduction
11.2 Methodology
11.2.1 Chemical Equilibrium Method
11.2.2 System Definition
11.3 Results and Discussion
11.4 Conclusion
References
Chapter 12: Energy Usage in Glass Industry: Past, Today, and Tomorrow
12.1 Introduction
12.1.1 Past
12.1.2 Today
12.1.3 Tomorrow
12.2 Energy Consumption in Glass Furnaces
12.3 Feasibility of Using Hydrogen or Electric Energy Instead of Natural Gas
12.3.1 Case 1: Full Natural Gas
12.3.2 Case 2: Electric Boosting Natural Gas Furnace (40% Electric)
12.3.3 Case 3: Electric Boosting (Solar Power Plant and Power Grid Connection) Natural Gas Furnace (40% SPP-PGC, 60% NGF)
12.3.4 Case 4: Hydrogen and Natural Gas Furnace (40% Hydrogen)
12.4 Conclusion
References
Chapter 13: A Multi-criteria Evaluation Framework for Prioritizing the Geothermal Power Plant Site Selection Factors by Fuzzy ...
13.1 Introduction.

13.2 Fuzzy AHP
13.3 Application of Fuzzy AHP
13.4 Conclusion
References
Chapter 14: Necessity of Ecological Efficiency Indicator Modal of Air Pollutants and Emissions from Ships in Maritime Transpor...
14.1 Introduction
14.2 Influences of Policies on Emissions
14.3 Emission Metrics and True Impact of Maritime Transportation
14.4 Discussions and Results
14.5 Conclusion
References
Chapter 15: Determination of Electric Vehicle Battery Cell Optimal Spacing Using the Intersection of Asymptotes Method
15.1 Introduction
15.2 Methodology
15.3 Results and Discussion
15.4 Conclusion
References
Chapter 16: Investigating the Drying Kinetics of Pineapple Dried in Passive Indirect Mode Solar Dryer: Comparative Analysis Wi...
16.1 Introduction
16.2 Materials and Methods
16.2.1 Evaluation of Energy
16.2.2 Analysing the Drying Kinetics
16.3 Result Analysis and Discussion
16.3.1 Data of Solar Radiation
16.3.2 Evaluating Heat Supplied to Drying Section
16.3.3 Collector Efficiency
16.3.4 Drying Efficiency
16.3.5 Temperature Distribution
16.3.6 Drying Kinetics
16.3.6.1 Moisture Ratio
16.3.6.2 Rate of Drying
16.3.6.3 Effective Moisture Diffusion Coefficient
16.3.6.4 Coefficient of Heat Transfer
16.3.6.5 Coefficient of Mass Transfer
16.3.6.6 Activation Energy, SMER and SEC
16.4 Conclusion
References
Chapter 17: An Exergetic Investigation of a Marine Diesel Engine
17.1 Introduction
17.2 Method and Material
17.3 Result and Discussion
17.4 Conclusion
References
Chapter 18: Bibliometric Analysis of Alternative Fuel in Marine
18.1 Introduction
18.2 Material and Method
18.3 Result and Discussion
18.3.1 Author
18.3.2 Keywords
18.3.3 Country
18.4 Conclusion
References.

Chapter 19: Investigation of Different Raw Material Needs of the Energy Sector and Future Prospects
19.1 Introduction
19.2 Raw Materials in Energy Industry
19.3 Conclusion
References
Chapter 20: Investigation of Main Engine Turbocharger Fouling Effects on Fuel Oil Consumption by Using Engine Room Simulator
20.1 Introduction
20.2 Material and Method
20.3 Application
20.4 Conclusion
References
Chapter 21: Optimization of Tilt Angle and Maximization of Solar Radiation for Fixed and Tracking Surfaces: A Case Study for G...
21.1 Introduction
21.2 Related Works in Turkey
21.3 Materials and Methods
21.3.1 Case Study Region
21.3.2 Used Data and Calculation Model
21.3.3 Horizontal Solar Radiation Models
21.3.4 Calculations and Results
21.3.4.1 Optimal Tilt Angle Results of the Region
21.3.4.2 Radiation Values Collected by the Fixed Surfaces
21.3.4.3 Radiation Gain for the Solar Tracking Systems
21.4 Conclusions
References
Chapter 22: Applied Time Series Regression by Using Random Forest Algorithm for Forecasting of Electricity Consumption on a Da...
22.1 Introduction
22.2 Random Forest Algorithm
22.3 Methodology
22.3.1 Building a Random Forest Prediction Model
22.3.2 Evaluation of the Dataset
22.3.3 Parameter Setting of the Model
22.3.4 Evaluation of the Predicted Results
22.4 Results and Discussion
22.5 Conclusion
References
Chapter 23: Comparison Between PSO-Based and fmincon-Based Approaches of Optimal Power Flow for a Standard IEEE-30 Bus System
23.1 Introduction
23.2 Methodology
23.2.1 Objective Function
23.2.2 System Constraints
23.3 Solution Method
23.3.1 Solution Method by Fmincon
23.3.2 Solution Method by PSO
23.4 Result and Discussion
23.5 Conclusion
References.

Chapter 24: Goal-Oriented Requirements Engineering Approach to Energy Management Systems
24.1 Introduction
24.2 Background
24.2.1 Energy Management System
24.2.2 Goal-Oriented Requirements Engineering
24.3 Method
24.3.1 Limitations
24.4 Case Study
24.4.1 Phase 1 (Definition of EnMS Goals and Concepts)
24.4.2 Phase 2 (GORE Modelling of EnMS)
24.5 Conclusion
Appendix: Integrated GRL Models of Phase 1 and Phase 2
References
Chapter 25: Decision-Making on Nuclear Power Plant Site Selection in Turkey
25.1 Introduction
25.2 Methodology
25.3 Results
25.4 Conclusion
References
Chapter 26: Optimization of CO2 Conversion and Estimation of Synthetic Methane Production Using Deep Neural Networks
26.1 Introduction
26.2 Proposed Study
26.3 Experimental Results
26.3.1 Data
26.3.2 Experimental Setup
26.3.3 Optimization of the CO2 Conversion
26.3.4 Estimation of the CH4/H2
26.4 Conclusion
References
Chapter 27: A Comprehensive Review on Sustainability and Energy Management of Seaports
27.1 Introduction
27.2 Literature Review
27.3 Results and Discussion
27.4 Conclusion
References
Chapter 28: Comparative Investigation of the Spray Properties of Ethyl and Methyl Ester-Based Biodiesels
28.1 Introduction
28.2 Materials and Methods
28.3 Results and Discussion
28.4 Conclusion
References
Chapter 29: A New Solar-Assisted Power, Cooling, and Freshwater Production System Considering the Energy Storage Option
29.1 Introduction
29.2 System Description
29.3 System Modelling
29.4 Results and Discussion
29.5 Conclusion
References
Chapter 30: Design and Thermodynamic Analysis of a Novel Power, Methanol, and Light Olefins Trigeneration System Fed with Shal...
30.1 Introduction
30.2 System Description
30.3 System Modeling.