Linked e-resources
Details
Table of Contents
Preface
About the Companion Website
1 Frequency Spectra of Digital Signals
1.1 EMC Units
1.1.1 Logarithm and Decibel Definition
1.1.2 Power and Voltage (Current) Gain in dB
1.1.3 EMC dB Units
1.2 Fourier Series Representation of Periodic Signals
1.3 Spectrum of a Clock Signal
1.4 Effect of the Rise Time, Signal Amplitude, Fundamental Frequency, and Duty Cycle on the Signal Spectrum
1.4.1 Effect of the Rise Time
1.4.2 Effect of the Signal Amplitude
1.4.3 Effect of the Fundamental Frequency
1.4.4 Effect of the Duty Cycle
1.5 Laboratory Exercises
1.5.1 Spectrum of a Digital Clock Signal
1.5.2 Laboratory Equipment and Supplies
1.5.3 Measured Spectrum vs. Calculated Spectrum
1.5.4 Effect of the Rise Time
1.5.5 Effect of the Signal Amplitude
1.5.6 Effect of the Fundamental Frequency
1.5.7 Effect of the Duty Cycle
References
2 EM Coupling Mechanisms
2.1 Wavelength and Electrical Dimensions
2.1.1 Concept of a Wave
2.1.2 Uniform Plane EM Wave in Time Domain
2.1.3 Uniform Plane EM Wave in Frequency Domain
2.2 EMC Interference Problem
2.3 Capacitive Coupling
2.3.1 Shielding to Reduce Capacitive Coupling
2.4 Inductive Coupling
2.4.1 Shielding to Reduce Inductive Coupling
2.5 Crosstalk Between PCB Traces
2.6 Common-Impedance Coupling
2.7 Laboratory Exercises
2.7.1 Crosstalk Between PCB Traces
References
3 Non-Ideal Behavior of Passive Components
3.1 Resonance in RLC Circuits
3.1.1 "Pure" Series Resonance - Non-Ideal Capacitor Model
3.1.2 "Pure" Parallel Resonance - Ferrite Bead Model
3.1.3 "Hybrid" Series Resonance - Non-Ideal Resistor Model
3.1.4 "Hybrid" Parallel Resonance - Non-Ideal Inductor Model
3.2 Non-Ideal Behavior of Resistors
3.2.1 Circuit Model and Impedance
3.2.2 Parasitic Capacitance Estimation - Discrete Components
3.2.3 Parasitic Capacitance Estimation - PCB Components
3.3 Non-Ideal Behavior of Capacitors
3.3.1 Circuit Model and Impedance
3.3.2 Parasitic Inductance Estimation - Discrete Components
3.3.3 Parasitic Inductance Estimation - PCB Components
3.4 Non-Ideal Behavior of Inductors
3.4.1 Circuit Model and Impedance
3.4.2 Parasitic Capacitance Estimation - Discrete Components
3.4.3 Parasitic Capacitance Estimation - PCB Components
3.5 Non-Ideal Behavior of a PCB Trace
3.5.1 Circuit Model and Impedance
3.6 Impact of the PCB Trace Length on Impedance of the Passive Components
3.6.1 Impedance of a Resistor - Impact of the PCB Trace
3.6.2 Impedance of a Capacitor - Impact of the PCB Trace
3.6.3 Impedance of an Inductor - Impact of the PCB Trace
3.6.4 Impedance of an Inductor vs. Impedance of the PCB Trace
3.7 Laboratory Exercises
3.7.1 Non-Ideal Behavior of Capacitors and Inductors, and Impact of the PCB Trace Length on Impedance
3.7.2 Laboratory Equipment and Supplies
3.7.3 Laboratory Procedure - Non-Ideal Behavior of Capacitors and Inductors
3.7.4 Laboratory Procedure - Impact of the PCB Trace Length on Impedance
References
4 Power Distribution Network
4.1 CMOS Inverter Switching
4.2 Decoupling Capacitors
4.2.1 Decoupling Capacitor Impact - Measurements
4.2.2 Decoupling Capacitor Configurations
4.3 Decoupling Capacitors and Embedded Capacitance
4.3.1 Decoupling Capacitors and Closely vs. Not Closely Spaced Power and Ground Planes
4.3.2 Impact of the Number and Values of the Decoupling Capacitors
4.4 Laboratory Exercises
4.4.1 Decoupling Capacitors
4.4.2 Embedded Capacitance and Decoupling Capacitors
References
5 EMC Filters
5.1 Insertion Loss Definition
5.2 Basic Filter Configurations
5.3 Source and Load Impedance Impact
5.4 What Do We Mean by Low or High Impedance?
5.5 LC and CL Filters
5.5.1 LC Filter
5.5.2 CL Filter
5.5.3 LC Filter vs. CL Filter
5.6 Pi and T Filters
5.6.1 Pi Filter
5.6.2 T Filter
5.6.3 Pi Filter vs. T Filter
5.7 LCLC and CLCL Filters
5.7.1 LCLC Filter
5.7.2 CLCL Filter
5.7.3 LCLC Filter vs. CLCL Filter
5.8 Laboratory Exercises
5.8.1 Input Impedance and Insertion Loss of EMC Filters
5.8.2 Laboratory Equipment and Supplies
5.8.3 Laboratory Procedure
References
6 Transmission Lines - Time Domain
6.1 Introduction
6.1.1 Transmission Line Effects
6.1.2 When a Line Is not a Transmission Line
6.1.3 Transmission Line Equations
6.2 Transient Analysis
6.2.1 Reflections at a Resistive Load
6.2.2 Reflections at a Resistive Discontinuity
6.2.3 Reflections at a Shunt Resistive Discontinuity
6.2.4 Reflections with Transmission Lines in Parallel
6.2.5 Reflections at a Reactive Load
6.2.6 Reflections at a Shunt Reactive Discontinuity
6.3 Eye Diagram
6.3.1 Fundamental Concepts
6.3.2 Impact of Driver, HDMI Cable, and Receiver
6.4 Laboratory Exercises
6.4.1 Transmission Line Reflections
6.4.2 Laboratory Equipment and Supplies
6.4.3 Reflections at a Resistive Load
6.4.4 Bounce Diagram
6.4.5 Reflections at a Resistive Discontinuity
References
7 Transmission Lines - Frequency Domain
7.1 Frequency-Domain Solution
7.1.1 The Complete Circuit Model - Voltage, Current, and Input Impedance along the Transmission Line
7.1.2 Frequency-Domain Solution - Example
7.2 Smith Chart and Input Impedance to the Transmission Line
7.2.1 Smith Chart Fundamentals
7.2.2 Input Impedance to the Transmission Line
7.3 Standing Waves and VSWR
7.4 Laboratory Exercises
7.4.1 Input Impedance to Transmission Line - Smith Chart
7.4.2 Laboratory Procedure - Smith Chart
References
8 Antennas and Radiation
8.1 Bridge Between the Transmission Line Theory and Antennas
8.2 Electric (Hertzian) Dipole Antenna
8.2.1 Wave Impedance and Far-Field Criterion
8.2.2 Wave Impedance in the Near Field
8.3 Magnetic Dipole Antenna
8.3.1 Wave Impedance and Far-Field Criterion
8.3.2 Wave Impedance in the Near Field
8.4 Half-Wave Dipole and Quarter-Wave Monopole Antennas
8.4.1 Half-Wave Dipole Antenna
8.4.2 Quarter-Wave Monopole Antenna
8.5 Balanced-Unbalanced Antenna Structures and Baluns
8.5.1 Balanced and Unbalanced Half-Wave Dipole Antenna
8.5.2 Sleeve (Bazooka) Balun
8.5.3 Input Impedance to the Transmission Line
8.5.4 Quarter-Wavelength Sleeve Balun
8.6 Sleeve Dipole Antenna Design and Build
8.6.1 Symmetrically Driven Half-Wave Dipole Antenna
8.6.2 Asymmetrically Driven Dipole Antenna and a Sleeve Dipole
8.6.3 Sleeve Dipole Antenna Design
8.6.4 Sleeve Dipole Antenna Design Through Simulation
8.6.5 Construction and Tuning of a Sleeve Dipole
8.7 Antennas Arrays
8.8 Log-Periodic Antenna
8.9 Biconical Antenna
8.10 Antenna Impedance and VSWR
8.11 Laboratory Exercises
8.11.1 Log-Periodic and Bicon Antenna Impedance and VSWR Measurements
8.11.2 Loop Antenna Construction
References
9 Differential- and Common-Mode Currents and Radiation
9.1 Differential- and Common-Mode Currents
9.1.1 Common-Mode Current Creation
9.2 Common-Mode Choke
9.3 Differential-Mode and Common-Mode Radiation
9.3.1 Differential-Mode Radiation
9.3.2 Common-Mode Radiation
9.4 Laboratory Exercises
9.4.1 Differential-Mode and Common-Mode Current Measurement
9.4.2 Laboratory Equipment and Supplies
9.4.3 Laboratory Procedure - Differential-Mode and Common-Mode Current Measurements
References
10 Return-Current Path, Flow, and Distribution
10.1 Return-Current Path
10.2 Return-Current Flow
10.3 Return-Current Distribution
10.3.1 Microstrip Line PCB
10.3.2 Stripline PCB
10.4 Laboratory Exercises
10.4.1 Path of the Return Current
References
11 Shielding to Prevent Radiation
11.1 Uniform Plane Wave
11.1.1 Skin Depth
11.1.2 Current Density in Conductors
11.1.3 Reflection and Transmission at a Normal Boundary
11.2 Far-Field Shielding
11.2.1 Shielding Effectiveness - Exact Solution
11.2.2 Shielding Effectiveness - Approximate Solution - Version 1
11.2.3 Shielding Effectiveness - Approximate Solution - Version 2
11.2.4 Shielding Effectiveness - Simulations
11.3 Near-Field Shielding
11.3.1 Electric Field Sources
11.3.2 Magnetic Field Sources
11.3.3 Shielding Effectiveness - Simulations
11.3.4.
Shielding Effectiveness - Measurements
11.4 Laboratory Exercises
11.4.1 Shielding Effectiveness - Simulations
11.4.2 Shielding Effectiveness - Measurements
References
12 SMPS Design for EMC
12.1 Basics of SMPS Operation
12.1.1 Basic SMPS Topology
12.1.2 Basic SMPS Design
12.2 DC/DC Converter Design with EMC Considerations
12.2.1 Switching Frequency
12.2.2 Output Inductor
12.2.3 Output Capacitor
12.2.4 Catch Diode
12.2.5 Input Capacitor
12.2.6 Bootstrap Capacitor
12.2.7 Undervoltage Lockout
12.2.8 Feedback Pin
12.2.9 Compensation Network
12.2.10 Complete Regulator Circuitry
12.2.11 EMC Considerations
12.3 Laboratory Exercises
12.3.1 SMPS Design and Build
12.3.2 Laboratory Equipment and Supplies
12.3.3 Laboratory Procedure
References
A Evaluation of EMC Emissions and Ground Techniques on 1- and 2-Layer PCBs with Power Converters
A. 1 Top-Level Description of the Design Problem
A.. 1 Functional Block Details
A.1. 2 One-Layer Board Topologies
A.1. 3 Two-Layer Board Topologies
A. 2 DC/DC Converter - Baseline EMC Emissions Evaluation
A.2. 1 CISPR 25 Radiated Emissions Test Results
A.. 2 CISPR 25 Conducted Emissions (Voltage Method) Test Results
A.2. 3 CISPR 25 Conducted Emissions (Current Method) Test Results
A. 3 DC/DC Converter - EMC Countermeasures - Radiated Emissions Results
A.3. 1 EMC-A and EMC-E Input and Output Capacitor Impact
A.3. 2 EMC-A Input Inductor Impact
A.. 3 EMC-C Switching Inductor Impact
A.3. 4 EMC-B and EMC-D Snubber Impact
A.3. 5 EMC-A, EMC-E - Conducted Emissions Countermeasures Impact
A.3. 6 Impact of the Shield Frame
A. 4 DC/DC Converter - EMC Countermeasures - Conducted Emissions Results - Voltage Method
A.4. 1 EMC-A and EMC-E Input and Output Capacitor Impact
A.4. 2 EMC-A Input Inductor Impact
A.4. 3 EMC-A Additional Input Capacitors Impact
A.. 4 EMC-A Input Inductor Impact
A.4. 5 EMC-C Switching Inductor Impact
A.4. 6 EMC-B and EMC-D Snubber Impact
A. 5 DC/DC Converter - EMC Countermeasures - Conducted Emissions Results - Current Method
A.5. 1 EMC-A, EMC-C, and EMC-E Input and Output Capacitor and Inductor Impact
A.5. 2 EMC-B and EMC-D Snubber Impact
A. 6 PCB Layout Considerations
A.6. 1 Introduction
A.6. 2 Visualizing Complete Forward and Return Paths
A.6. 3 Return-Plane Split in AC-DC Converter
A. 7 AC/DC Converter Design with EMC Considerations
A.7. 1 AC/DC Converter Schematics and Design Requirements
A.7. 2 EMC Considerations
A. 8 AC/DC Converter - Baseline EMC Emissions Evaluation
A.8. 1 Radiated Emissions Test Results
A.8. 2 Conducted Emissions Test Results
A. 9 AC/DC Converter - EMC Countermeasures - Conducted and Radiated Emissions Results
A.9. 1 Conducted Emissions Test Results
A.9. 2 Radiated Emissions Test Results
A. 10 Complete System - Conducted and Radiated Emissions Results
A.0. 1 Complete System and Board Topologies
A.10. 2 Conducted Emissions Results
A.10. 3 Radiated Emissions Results
A.10. 4 Conclusions
References
Index.
About the Companion Website
1 Frequency Spectra of Digital Signals
1.1 EMC Units
1.1.1 Logarithm and Decibel Definition
1.1.2 Power and Voltage (Current) Gain in dB
1.1.3 EMC dB Units
1.2 Fourier Series Representation of Periodic Signals
1.3 Spectrum of a Clock Signal
1.4 Effect of the Rise Time, Signal Amplitude, Fundamental Frequency, and Duty Cycle on the Signal Spectrum
1.4.1 Effect of the Rise Time
1.4.2 Effect of the Signal Amplitude
1.4.3 Effect of the Fundamental Frequency
1.4.4 Effect of the Duty Cycle
1.5 Laboratory Exercises
1.5.1 Spectrum of a Digital Clock Signal
1.5.2 Laboratory Equipment and Supplies
1.5.3 Measured Spectrum vs. Calculated Spectrum
1.5.4 Effect of the Rise Time
1.5.5 Effect of the Signal Amplitude
1.5.6 Effect of the Fundamental Frequency
1.5.7 Effect of the Duty Cycle
References
2 EM Coupling Mechanisms
2.1 Wavelength and Electrical Dimensions
2.1.1 Concept of a Wave
2.1.2 Uniform Plane EM Wave in Time Domain
2.1.3 Uniform Plane EM Wave in Frequency Domain
2.2 EMC Interference Problem
2.3 Capacitive Coupling
2.3.1 Shielding to Reduce Capacitive Coupling
2.4 Inductive Coupling
2.4.1 Shielding to Reduce Inductive Coupling
2.5 Crosstalk Between PCB Traces
2.6 Common-Impedance Coupling
2.7 Laboratory Exercises
2.7.1 Crosstalk Between PCB Traces
References
3 Non-Ideal Behavior of Passive Components
3.1 Resonance in RLC Circuits
3.1.1 "Pure" Series Resonance - Non-Ideal Capacitor Model
3.1.2 "Pure" Parallel Resonance - Ferrite Bead Model
3.1.3 "Hybrid" Series Resonance - Non-Ideal Resistor Model
3.1.4 "Hybrid" Parallel Resonance - Non-Ideal Inductor Model
3.2 Non-Ideal Behavior of Resistors
3.2.1 Circuit Model and Impedance
3.2.2 Parasitic Capacitance Estimation - Discrete Components
3.2.3 Parasitic Capacitance Estimation - PCB Components
3.3 Non-Ideal Behavior of Capacitors
3.3.1 Circuit Model and Impedance
3.3.2 Parasitic Inductance Estimation - Discrete Components
3.3.3 Parasitic Inductance Estimation - PCB Components
3.4 Non-Ideal Behavior of Inductors
3.4.1 Circuit Model and Impedance
3.4.2 Parasitic Capacitance Estimation - Discrete Components
3.4.3 Parasitic Capacitance Estimation - PCB Components
3.5 Non-Ideal Behavior of a PCB Trace
3.5.1 Circuit Model and Impedance
3.6 Impact of the PCB Trace Length on Impedance of the Passive Components
3.6.1 Impedance of a Resistor - Impact of the PCB Trace
3.6.2 Impedance of a Capacitor - Impact of the PCB Trace
3.6.3 Impedance of an Inductor - Impact of the PCB Trace
3.6.4 Impedance of an Inductor vs. Impedance of the PCB Trace
3.7 Laboratory Exercises
3.7.1 Non-Ideal Behavior of Capacitors and Inductors, and Impact of the PCB Trace Length on Impedance
3.7.2 Laboratory Equipment and Supplies
3.7.3 Laboratory Procedure - Non-Ideal Behavior of Capacitors and Inductors
3.7.4 Laboratory Procedure - Impact of the PCB Trace Length on Impedance
References
4 Power Distribution Network
4.1 CMOS Inverter Switching
4.2 Decoupling Capacitors
4.2.1 Decoupling Capacitor Impact - Measurements
4.2.2 Decoupling Capacitor Configurations
4.3 Decoupling Capacitors and Embedded Capacitance
4.3.1 Decoupling Capacitors and Closely vs. Not Closely Spaced Power and Ground Planes
4.3.2 Impact of the Number and Values of the Decoupling Capacitors
4.4 Laboratory Exercises
4.4.1 Decoupling Capacitors
4.4.2 Embedded Capacitance and Decoupling Capacitors
References
5 EMC Filters
5.1 Insertion Loss Definition
5.2 Basic Filter Configurations
5.3 Source and Load Impedance Impact
5.4 What Do We Mean by Low or High Impedance?
5.5 LC and CL Filters
5.5.1 LC Filter
5.5.2 CL Filter
5.5.3 LC Filter vs. CL Filter
5.6 Pi and T Filters
5.6.1 Pi Filter
5.6.2 T Filter
5.6.3 Pi Filter vs. T Filter
5.7 LCLC and CLCL Filters
5.7.1 LCLC Filter
5.7.2 CLCL Filter
5.7.3 LCLC Filter vs. CLCL Filter
5.8 Laboratory Exercises
5.8.1 Input Impedance and Insertion Loss of EMC Filters
5.8.2 Laboratory Equipment and Supplies
5.8.3 Laboratory Procedure
References
6 Transmission Lines - Time Domain
6.1 Introduction
6.1.1 Transmission Line Effects
6.1.2 When a Line Is not a Transmission Line
6.1.3 Transmission Line Equations
6.2 Transient Analysis
6.2.1 Reflections at a Resistive Load
6.2.2 Reflections at a Resistive Discontinuity
6.2.3 Reflections at a Shunt Resistive Discontinuity
6.2.4 Reflections with Transmission Lines in Parallel
6.2.5 Reflections at a Reactive Load
6.2.6 Reflections at a Shunt Reactive Discontinuity
6.3 Eye Diagram
6.3.1 Fundamental Concepts
6.3.2 Impact of Driver, HDMI Cable, and Receiver
6.4 Laboratory Exercises
6.4.1 Transmission Line Reflections
6.4.2 Laboratory Equipment and Supplies
6.4.3 Reflections at a Resistive Load
6.4.4 Bounce Diagram
6.4.5 Reflections at a Resistive Discontinuity
References
7 Transmission Lines - Frequency Domain
7.1 Frequency-Domain Solution
7.1.1 The Complete Circuit Model - Voltage, Current, and Input Impedance along the Transmission Line
7.1.2 Frequency-Domain Solution - Example
7.2 Smith Chart and Input Impedance to the Transmission Line
7.2.1 Smith Chart Fundamentals
7.2.2 Input Impedance to the Transmission Line
7.3 Standing Waves and VSWR
7.4 Laboratory Exercises
7.4.1 Input Impedance to Transmission Line - Smith Chart
7.4.2 Laboratory Procedure - Smith Chart
References
8 Antennas and Radiation
8.1 Bridge Between the Transmission Line Theory and Antennas
8.2 Electric (Hertzian) Dipole Antenna
8.2.1 Wave Impedance and Far-Field Criterion
8.2.2 Wave Impedance in the Near Field
8.3 Magnetic Dipole Antenna
8.3.1 Wave Impedance and Far-Field Criterion
8.3.2 Wave Impedance in the Near Field
8.4 Half-Wave Dipole and Quarter-Wave Monopole Antennas
8.4.1 Half-Wave Dipole Antenna
8.4.2 Quarter-Wave Monopole Antenna
8.5 Balanced-Unbalanced Antenna Structures and Baluns
8.5.1 Balanced and Unbalanced Half-Wave Dipole Antenna
8.5.2 Sleeve (Bazooka) Balun
8.5.3 Input Impedance to the Transmission Line
8.5.4 Quarter-Wavelength Sleeve Balun
8.6 Sleeve Dipole Antenna Design and Build
8.6.1 Symmetrically Driven Half-Wave Dipole Antenna
8.6.2 Asymmetrically Driven Dipole Antenna and a Sleeve Dipole
8.6.3 Sleeve Dipole Antenna Design
8.6.4 Sleeve Dipole Antenna Design Through Simulation
8.6.5 Construction and Tuning of a Sleeve Dipole
8.7 Antennas Arrays
8.8 Log-Periodic Antenna
8.9 Biconical Antenna
8.10 Antenna Impedance and VSWR
8.11 Laboratory Exercises
8.11.1 Log-Periodic and Bicon Antenna Impedance and VSWR Measurements
8.11.2 Loop Antenna Construction
References
9 Differential- and Common-Mode Currents and Radiation
9.1 Differential- and Common-Mode Currents
9.1.1 Common-Mode Current Creation
9.2 Common-Mode Choke
9.3 Differential-Mode and Common-Mode Radiation
9.3.1 Differential-Mode Radiation
9.3.2 Common-Mode Radiation
9.4 Laboratory Exercises
9.4.1 Differential-Mode and Common-Mode Current Measurement
9.4.2 Laboratory Equipment and Supplies
9.4.3 Laboratory Procedure - Differential-Mode and Common-Mode Current Measurements
References
10 Return-Current Path, Flow, and Distribution
10.1 Return-Current Path
10.2 Return-Current Flow
10.3 Return-Current Distribution
10.3.1 Microstrip Line PCB
10.3.2 Stripline PCB
10.4 Laboratory Exercises
10.4.1 Path of the Return Current
References
11 Shielding to Prevent Radiation
11.1 Uniform Plane Wave
11.1.1 Skin Depth
11.1.2 Current Density in Conductors
11.1.3 Reflection and Transmission at a Normal Boundary
11.2 Far-Field Shielding
11.2.1 Shielding Effectiveness - Exact Solution
11.2.2 Shielding Effectiveness - Approximate Solution - Version 1
11.2.3 Shielding Effectiveness - Approximate Solution - Version 2
11.2.4 Shielding Effectiveness - Simulations
11.3 Near-Field Shielding
11.3.1 Electric Field Sources
11.3.2 Magnetic Field Sources
11.3.3 Shielding Effectiveness - Simulations
11.3.4.
Shielding Effectiveness - Measurements
11.4 Laboratory Exercises
11.4.1 Shielding Effectiveness - Simulations
11.4.2 Shielding Effectiveness - Measurements
References
12 SMPS Design for EMC
12.1 Basics of SMPS Operation
12.1.1 Basic SMPS Topology
12.1.2 Basic SMPS Design
12.2 DC/DC Converter Design with EMC Considerations
12.2.1 Switching Frequency
12.2.2 Output Inductor
12.2.3 Output Capacitor
12.2.4 Catch Diode
12.2.5 Input Capacitor
12.2.6 Bootstrap Capacitor
12.2.7 Undervoltage Lockout
12.2.8 Feedback Pin
12.2.9 Compensation Network
12.2.10 Complete Regulator Circuitry
12.2.11 EMC Considerations
12.3 Laboratory Exercises
12.3.1 SMPS Design and Build
12.3.2 Laboratory Equipment and Supplies
12.3.3 Laboratory Procedure
References
A Evaluation of EMC Emissions and Ground Techniques on 1- and 2-Layer PCBs with Power Converters
A. 1 Top-Level Description of the Design Problem
A.. 1 Functional Block Details
A.1. 2 One-Layer Board Topologies
A.1. 3 Two-Layer Board Topologies
A. 2 DC/DC Converter - Baseline EMC Emissions Evaluation
A.2. 1 CISPR 25 Radiated Emissions Test Results
A.. 2 CISPR 25 Conducted Emissions (Voltage Method) Test Results
A.2. 3 CISPR 25 Conducted Emissions (Current Method) Test Results
A. 3 DC/DC Converter - EMC Countermeasures - Radiated Emissions Results
A.3. 1 EMC-A and EMC-E Input and Output Capacitor Impact
A.3. 2 EMC-A Input Inductor Impact
A.. 3 EMC-C Switching Inductor Impact
A.3. 4 EMC-B and EMC-D Snubber Impact
A.3. 5 EMC-A, EMC-E - Conducted Emissions Countermeasures Impact
A.3. 6 Impact of the Shield Frame
A. 4 DC/DC Converter - EMC Countermeasures - Conducted Emissions Results - Voltage Method
A.4. 1 EMC-A and EMC-E Input and Output Capacitor Impact
A.4. 2 EMC-A Input Inductor Impact
A.4. 3 EMC-A Additional Input Capacitors Impact
A.. 4 EMC-A Input Inductor Impact
A.4. 5 EMC-C Switching Inductor Impact
A.4. 6 EMC-B and EMC-D Snubber Impact
A. 5 DC/DC Converter - EMC Countermeasures - Conducted Emissions Results - Current Method
A.5. 1 EMC-A, EMC-C, and EMC-E Input and Output Capacitor and Inductor Impact
A.5. 2 EMC-B and EMC-D Snubber Impact
A. 6 PCB Layout Considerations
A.6. 1 Introduction
A.6. 2 Visualizing Complete Forward and Return Paths
A.6. 3 Return-Plane Split in AC-DC Converter
A. 7 AC/DC Converter Design with EMC Considerations
A.7. 1 AC/DC Converter Schematics and Design Requirements
A.7. 2 EMC Considerations
A. 8 AC/DC Converter - Baseline EMC Emissions Evaluation
A.8. 1 Radiated Emissions Test Results
A.8. 2 Conducted Emissions Test Results
A. 9 AC/DC Converter - EMC Countermeasures - Conducted and Radiated Emissions Results
A.9. 1 Conducted Emissions Test Results
A.9. 2 Radiated Emissions Test Results
A. 10 Complete System - Conducted and Radiated Emissions Results
A.0. 1 Complete System and Board Topologies
A.10. 2 Conducted Emissions Results
A.10. 3 Radiated Emissions Results
A.10. 4 Conclusions
References
Index.