Linked e-resources
Details
Table of Contents
Preface; Contents; RILEM Publications; Part I Characterization of Binder-AggregateInteraction; 1 Development of Failure Master Curve for Asphalt Mastics Characterization; Abstract; 1 Introduction and Background; 2 Materials and Test Methods; 2.1 Materials; 2.2 Test Method; 3 Discussion of Results; 4 Concluding Remarks; References; 2 Semi-automatic Evaluation of the Degree of Bitumen Coverage on Bitumen-Coated Aggregates; Abstract; 1 Introduction; 2 Experimental Work; 2.1 Materials and Equipment; 2.2 Research Approach; 3 Results; 4 Procedure Validation; 5 Conclusions; References
3 An Advanced Low Temperature Rheological and Fracture Test Method for Bitumen Purchase Specifications and Pavement Performance Prediction: 4-mm DSR/ABCDAbstract; 1 Introduction; 2 Experimental; 3 Materials; 4 Results and Discussion; 4.1 Standard Binder Purchase Specifications from the 4-mm DSR and ABCD Test Results; 4.2 Mix Coefficient of Thermal Expansion (CTE); 4.3 Using 4-mm DSR Data to Calculate the Thermal Stress Variation in the Pavement
4.4 Using the Calculated Thermal Stress Build-up in the Mix from 4-mm DSR and the Measured Fracture Stress from the ABCD to Calculate a Mix Critical Cracking Temperature5 Conclusions; Acknowledgements/Disclaimer; References; 4 Microstructure-Based Visco-Elastoplastic Continuum Model of Asphalt Concrete; Abstract; 1 Introduction; 2 Background; 3 Methodology; 3.1 Specimen Preparation; 3.2 Uniaxial Compression Test; 3.3 Aggregate Structure Parameters; 3.4 Constitutive Model of Asphalt Binder; 4 Data Analysis; 5 Conclusions; References
5 Estimation of Appropriate Filler Quantity in Asphalt Mix from Microscopic StudiesAbstract; 1 Introduction; 2 Experimental Study; 2.1 Indirect Tensile Test; 2.2 Scanning Electron Microscope (SEM) Study; 3 Conclusions; Acknowledgments; References; 6 A Mineralogical Approach of the Interactions Between Bitumen, Clay and Water in Hot Mix Asphalt (HMA); Abstract; 1 Introduction; 2 Materials and Test Procedures; 2.1 Aggregates; 2.2 Preparation of Clay-Rich AC Mixtures; 2.3 Test Procedures; 3 Results and Discussion; 3.1 Surface Energy; 3.2 Bitumen-Clay Interaction (Work of Adhesion)
3.3 Water Resistance of Clay-Rich AC Mixture4 Conclusions and Outlook; Acknowledgments; References; Part II Innovative Testing of Bituminous Binders,Additives and Modifiers; 7 Storage Stability of Bituminous Binders Reinforced with Nano-Additives; Abstract; 1 Introduction; 2 Experimental Investigation; 2.1 Materials; 2.2 Testing Program; 3 Results and Discussion; 3.1 Bitumen-Nanoclay Blends; 3.2 Bitumen-Nanotube Blends; 4 Conclusions; Acknowledgments; References; 8 Ageing Performances of Asphaltite Modified Bitumens; Comparisons with Equivalent Petroleum Bitumens; Abstract; 1 Introduction
3 An Advanced Low Temperature Rheological and Fracture Test Method for Bitumen Purchase Specifications and Pavement Performance Prediction: 4-mm DSR/ABCDAbstract; 1 Introduction; 2 Experimental; 3 Materials; 4 Results and Discussion; 4.1 Standard Binder Purchase Specifications from the 4-mm DSR and ABCD Test Results; 4.2 Mix Coefficient of Thermal Expansion (CTE); 4.3 Using 4-mm DSR Data to Calculate the Thermal Stress Variation in the Pavement
4.4 Using the Calculated Thermal Stress Build-up in the Mix from 4-mm DSR and the Measured Fracture Stress from the ABCD to Calculate a Mix Critical Cracking Temperature5 Conclusions; Acknowledgements/Disclaimer; References; 4 Microstructure-Based Visco-Elastoplastic Continuum Model of Asphalt Concrete; Abstract; 1 Introduction; 2 Background; 3 Methodology; 3.1 Specimen Preparation; 3.2 Uniaxial Compression Test; 3.3 Aggregate Structure Parameters; 3.4 Constitutive Model of Asphalt Binder; 4 Data Analysis; 5 Conclusions; References
5 Estimation of Appropriate Filler Quantity in Asphalt Mix from Microscopic StudiesAbstract; 1 Introduction; 2 Experimental Study; 2.1 Indirect Tensile Test; 2.2 Scanning Electron Microscope (SEM) Study; 3 Conclusions; Acknowledgments; References; 6 A Mineralogical Approach of the Interactions Between Bitumen, Clay and Water in Hot Mix Asphalt (HMA); Abstract; 1 Introduction; 2 Materials and Test Procedures; 2.1 Aggregates; 2.2 Preparation of Clay-Rich AC Mixtures; 2.3 Test Procedures; 3 Results and Discussion; 3.1 Surface Energy; 3.2 Bitumen-Clay Interaction (Work of Adhesion)
3.3 Water Resistance of Clay-Rich AC Mixture4 Conclusions and Outlook; Acknowledgments; References; Part II Innovative Testing of Bituminous Binders,Additives and Modifiers; 7 Storage Stability of Bituminous Binders Reinforced with Nano-Additives; Abstract; 1 Introduction; 2 Experimental Investigation; 2.1 Materials; 2.2 Testing Program; 3 Results and Discussion; 3.1 Bitumen-Nanoclay Blends; 3.2 Bitumen-Nanotube Blends; 4 Conclusions; Acknowledgments; References; 8 Ageing Performances of Asphaltite Modified Bitumens; Comparisons with Equivalent Petroleum Bitumens; Abstract; 1 Introduction