Linked e-resources
Details
Table of Contents
1.Experimental Characterization of Shape Fixity in Transversely Curved Unimorph SMP Actuators
2.Full-field Three-Dimensional Characterization of Non-repetitive Motions by Single-shot Multiplexed Digital Holography
3.Basic Foundations of Signal Analysis Models Applied to Retrieval of Displacements and their Derivatives Encoded in Fringe Patterns
4.Recent Optical Measurements for the Mechanical Properties of Thin Films
5.Evaluation of the Penalized Least Squares Method for Strain Computation
6.Speckle Projection Profilometry Using a Diffractive Telecentric Arrangement
7.Use of VFM for Heterogeneity Evaluation of Materials Under Uniaxial Tensile Stress
8.Optimized Test Design for Identification the Variation of Elastic Stiffness Properties of Loblolly Pine (pinus taeda) Pith to Bark
9.Investigation of the Hydric Transfer Phenomenon in Wood at the Ring Scale With the Grid Method
10.Extension of the Non-Linear Virtual Fields Method to Inertial Heterogeneous High Strain Rate Tests
11.Experimental Mechanics for Graduate Students
12.Bridge Foundation Depth Estimation using Sonic Echo Test
13.Detonation of Small Charges Buried in Cohesionless Soil
14.Similitude Analysis of Composite I-beams With Application to Subcomponent Testing of Wind Turbine Blades
15.Validating FSI Simulations in LS-DYNA 971 R7
16.In Vitro Experimental Study for the Determination of Cellular Characteristics of Mesenchymal Stem Cells Using a Non-uniform Deformation Field
17.Development of New Method for Direct Measurement of High Strain Rate Testing Parameters
18.Simultaneous Measurement of Polymerization Stress Evolution, Conversion Kinetics, and Exotherm in Real-time
19.Symmetric and Asymmetric Double Cantilever Beam Methods for Interfacial Adhesion Strength Measurement in Electronic Packaging
20.Broadband Electromechanical Spectroscopy: A Method for Measuring the Dynamic Electromechanical Response of Ferroelectrics
21.Experimental Study of Mechanical Performance in Friction Stir Welded Dissimilar Titanium Alloys
22.Testing a Multi-Bay Box Subjected to Combined Loads
23.A Study on the Generation of a Fine-grained Layer in Upsetting Between Flat and Conical Dies
24.Interface Microstructure and Strength of TLP Bonded Iron and Steel.
2.Full-field Three-Dimensional Characterization of Non-repetitive Motions by Single-shot Multiplexed Digital Holography
3.Basic Foundations of Signal Analysis Models Applied to Retrieval of Displacements and their Derivatives Encoded in Fringe Patterns
4.Recent Optical Measurements for the Mechanical Properties of Thin Films
5.Evaluation of the Penalized Least Squares Method for Strain Computation
6.Speckle Projection Profilometry Using a Diffractive Telecentric Arrangement
7.Use of VFM for Heterogeneity Evaluation of Materials Under Uniaxial Tensile Stress
8.Optimized Test Design for Identification the Variation of Elastic Stiffness Properties of Loblolly Pine (pinus taeda) Pith to Bark
9.Investigation of the Hydric Transfer Phenomenon in Wood at the Ring Scale With the Grid Method
10.Extension of the Non-Linear Virtual Fields Method to Inertial Heterogeneous High Strain Rate Tests
11.Experimental Mechanics for Graduate Students
12.Bridge Foundation Depth Estimation using Sonic Echo Test
13.Detonation of Small Charges Buried in Cohesionless Soil
14.Similitude Analysis of Composite I-beams With Application to Subcomponent Testing of Wind Turbine Blades
15.Validating FSI Simulations in LS-DYNA 971 R7
16.In Vitro Experimental Study for the Determination of Cellular Characteristics of Mesenchymal Stem Cells Using a Non-uniform Deformation Field
17.Development of New Method for Direct Measurement of High Strain Rate Testing Parameters
18.Simultaneous Measurement of Polymerization Stress Evolution, Conversion Kinetics, and Exotherm in Real-time
19.Symmetric and Asymmetric Double Cantilever Beam Methods for Interfacial Adhesion Strength Measurement in Electronic Packaging
20.Broadband Electromechanical Spectroscopy: A Method for Measuring the Dynamic Electromechanical Response of Ferroelectrics
21.Experimental Study of Mechanical Performance in Friction Stir Welded Dissimilar Titanium Alloys
22.Testing a Multi-Bay Box Subjected to Combined Loads
23.A Study on the Generation of a Fine-grained Layer in Upsetting Between Flat and Conical Dies
24.Interface Microstructure and Strength of TLP Bonded Iron and Steel.