Linked e-resources
Details
Table of Contents
Preface; Contents; 1 Options for Nanoreinforced Cast Al-Si Alloys with TiO2 Nanoparticles; Abstract; 1 Introduction; 2 Experimental Work; 2.1 Material Preparation; 2.2 Mechanical Testing; 2.3 Microstructure and SEM Analysis; 2.4 Wear Test for the TiO2 Nanoreinforced Alloy; 3 Results and Discussion; 3.1 Mechanical Properties; 3.1.1 Effect of Nanoparticles Addition; 3.1.2 Effect of Stirring Speed; 3.1.3 Effect of Casting Temperature; 3.2 Microstructural Evolution; 3.3 Wear Test Results; 4 Conclusion; Acknowledgement; References.
2 Mechanical Properties and Wear Resistance of Semisolid Cast Al2O3 Nano Reinforced Hypo and Hyper-eutectic Al-Si CompositesAbstract; 1 Introduction; 2 Experimental Procedures; 2.1 Materials Produced; 2.2 Casting and Composite Manufacturing; 2.2.1 Melting Furnace; 2.3 Melting Methodology and Approach; 2.4 Mechanical Properties; 2.4.1 Tensile Test; 2.4.2 Hardness Test; 2.4.3 Wear Test; 2.5 Material Characterization; 2.5.1 Microstructural Study; 2.5.2 Optical Microscopy (OM); 2.5.3 Scanning Electron Microscopy (SEM); 2.6 Statistical Analysis; 3 Results; 3.1 Mechanical Properties of the NMMC.
3.2 Statistical Analysis3.3 Microstructure Study; 3.4 Results of Wear Test; 4 Discussions; 5 Conclusion; Acknowledgement; References; 3 Simulation of a Crack Emanating from a Microvoid in Cement of a Reconstructed Acetabulum; Abstract; 1 Introduction; 2 Materials and Methods; 3 Results; 3.1 Crack Emanating from the Microvoid; 3.2 Interaction Effect; 3.3 The Orientation Effect; 3.3.1 Mobile Crack (CB) Oriented-Microvoid Interaction; 3.3.2 Mobile Crack Oriented-Fixed Crack Interaction; 3.3.3 Mobile Crack-Mobile Crack Interaction; 4 Conclusion; References.
4 Analysis of the Optical Properties of PVP/ZnO Composite NanofibersAbstract; 1 Introduction; 2 Materials and Methods; 3 Results; 3.1 Morphology Analysis; 3.2 UV-Vis Spectra Analysis; 4 Conclusion; Acknowledgments; References; 5 Multiobjective Optimization of Dielectric Material's Selection in Marine Environment; Abstract; 1 Introduction; 2 Literature Overview; 3 Theoretical Approach; 3.1 Frequency Dependence; 3.2 Moisture Dependence; 3.3 Temperature Dependence; 4 Proposed Solution; 5 Conclusions; References; 6 Metallurgical Quality Assessment of Modified Zn-Al-Cu Alloys; Abstract.
1 Introduction2 Materials and Experimental Procedure; 3 Results and Discussion; 4 Conclusion; References; 7 Fatigue Test of the Inconel Alloy 718 Under Three Point Bending Load at Low Frequency; Abstract; 1 Introduction; 2 Experimental Materials and Methods; 3 Results and Discussion; 4 Conclusions; Acknowledgments; References; 8 Development of a Finite Element Program for Determining Mat Pressure in the Canning Process of a Catalytic Converter; Abstract; 1 Introduction; 2 Finite Element Analysis; 2.1 Geometry of the Substrate Outer Surface.
2 Mechanical Properties and Wear Resistance of Semisolid Cast Al2O3 Nano Reinforced Hypo and Hyper-eutectic Al-Si CompositesAbstract; 1 Introduction; 2 Experimental Procedures; 2.1 Materials Produced; 2.2 Casting and Composite Manufacturing; 2.2.1 Melting Furnace; 2.3 Melting Methodology and Approach; 2.4 Mechanical Properties; 2.4.1 Tensile Test; 2.4.2 Hardness Test; 2.4.3 Wear Test; 2.5 Material Characterization; 2.5.1 Microstructural Study; 2.5.2 Optical Microscopy (OM); 2.5.3 Scanning Electron Microscopy (SEM); 2.6 Statistical Analysis; 3 Results; 3.1 Mechanical Properties of the NMMC.
3.2 Statistical Analysis3.3 Microstructure Study; 3.4 Results of Wear Test; 4 Discussions; 5 Conclusion; Acknowledgement; References; 3 Simulation of a Crack Emanating from a Microvoid in Cement of a Reconstructed Acetabulum; Abstract; 1 Introduction; 2 Materials and Methods; 3 Results; 3.1 Crack Emanating from the Microvoid; 3.2 Interaction Effect; 3.3 The Orientation Effect; 3.3.1 Mobile Crack (CB) Oriented-Microvoid Interaction; 3.3.2 Mobile Crack Oriented-Fixed Crack Interaction; 3.3.3 Mobile Crack-Mobile Crack Interaction; 4 Conclusion; References.
4 Analysis of the Optical Properties of PVP/ZnO Composite NanofibersAbstract; 1 Introduction; 2 Materials and Methods; 3 Results; 3.1 Morphology Analysis; 3.2 UV-Vis Spectra Analysis; 4 Conclusion; Acknowledgments; References; 5 Multiobjective Optimization of Dielectric Material's Selection in Marine Environment; Abstract; 1 Introduction; 2 Literature Overview; 3 Theoretical Approach; 3.1 Frequency Dependence; 3.2 Moisture Dependence; 3.3 Temperature Dependence; 4 Proposed Solution; 5 Conclusions; References; 6 Metallurgical Quality Assessment of Modified Zn-Al-Cu Alloys; Abstract.
1 Introduction2 Materials and Experimental Procedure; 3 Results and Discussion; 4 Conclusion; References; 7 Fatigue Test of the Inconel Alloy 718 Under Three Point Bending Load at Low Frequency; Abstract; 1 Introduction; 2 Experimental Materials and Methods; 3 Results and Discussion; 4 Conclusions; Acknowledgments; References; 8 Development of a Finite Element Program for Determining Mat Pressure in the Canning Process of a Catalytic Converter; Abstract; 1 Introduction; 2 Finite Element Analysis; 2.1 Geometry of the Substrate Outer Surface.