Linked e-resources
Details
Table of Contents
Preface; Contents; 1 The Optics Between Theory and Application in Arabic Golden Age; Abstract; 1 The Appropriation of Greek Heritage Age; 2 The Arabic Optic Before Ibn Al-Haytham; 3 Optical Work of Ibn Al-Haytham; 4 Work Movement of Ibn Al-Haytham in Islam Countries and Europe; 5 Conclusions; References; 2 Fatigue and Notch Mechanics; Abstract; 1 Introduction; 2 Stress-Life Approach to Fatigue; 3 Strain-Life Approach to Fatigue; 4 Linear Elastic Fracture Mechanics (LEFM); 5 Linear Elastic Notch Mechanics; 6 Sharp Notches, Scale Effect and Woehler Curves; 7 Conclusions.
3 Experimental Disparity Analysis of the Behavior and Fatigue of the 304L Stainless SteelAbstract; 1 Introduction; 2 Material, Specimen and Experimental Procedure; 3 Results; 4 Evolution of Cyclic Hardenings; 5 Cyclical Evolution of the Discharge Slope; 6 Conclusions; References; 4 Numerical Investigation on the Anisotropic Behavior of an Aluminum Alloy Type 2017A; Abstract; 1 Introduction; 2 Experimental Methodology; 3 The Model Multi Mechanisms; 3.1 Constitutive Equations of the Model; 3.2 Criterion; 3.3 Consistency Condition; 4 Results and Discussion; 5 Conclusion; References.
5 History of Microstructure Evolution and Its Effect on the Mechanical Behavior During Friction Welding for AISI 316Abstract; 1 Introduction; 2 Experimental Study; 2.1 Material; 2.2 Welding Process; 3 Mechanical Tests; 3.1 Tensile Test; 3.2 Micro-Hardness Test; 3.3 EDX and XRD Analysis; 4 Discussion; 5 Conclusions; References; 6 A Study of Selective Laser Melting Technology on the Ultra-High Strength Tool Steel Use-Quality, Mechanical Properties and Fatigue; Abstract; 1 Introduction; 2 Materials and Methods; 2.1 SLM Fabrication; 2.2 Machining of Samples; 3 Experimental Works, Results.
3.1 Testing of Machinability of the SLM Specimens3.2 Investigation of Produced Surfaces; 3.3 Fatigue Testing; 3.4 Fractography of the Tested Specimens; 4 Discussion; 5 Conclusions; Acknowledgments; References; 7 Transferability of Fracture Toughness with Constraint; Abstract; 1 Introduction; 2 Constraints at Defect Tip; 2.1 Singular Elastic Stress Distribution; 2.2 Singular Elastic-Plastic Stress Distribution; 2.3 Non-singular Elastic and Elastic Plastic Stress Distribution; 3 The Different Constraint Parameters; 3.1 T Stress; 3.2 Q Parameter; 3.3 Stress Triaxiality.
4 Influence of Constraint on Fracture Toughness5 Influence of Constraint on Transition Temperature; 6 Conclusion; References; 8 Crack Path Stabilisation and T-Stress Estimation in Connection with the Global Approach for Inclined Notches; Abstract; 1 Introduction; 2 Material and Specimen; 3 Determination of Birfurcation Angle; 4 Determination of the Equivalent Notch Stress Intensity Factor; 5 Conclusion; References; 9 Measuring of Strain and Displacements in Welded Joints Subjected to Tensile Load Using Stereometric Methods; Abstract; 1 Introduction; 2 Digital Image Correlation.
3 Experimental Disparity Analysis of the Behavior and Fatigue of the 304L Stainless SteelAbstract; 1 Introduction; 2 Material, Specimen and Experimental Procedure; 3 Results; 4 Evolution of Cyclic Hardenings; 5 Cyclical Evolution of the Discharge Slope; 6 Conclusions; References; 4 Numerical Investigation on the Anisotropic Behavior of an Aluminum Alloy Type 2017A; Abstract; 1 Introduction; 2 Experimental Methodology; 3 The Model Multi Mechanisms; 3.1 Constitutive Equations of the Model; 3.2 Criterion; 3.3 Consistency Condition; 4 Results and Discussion; 5 Conclusion; References.
5 History of Microstructure Evolution and Its Effect on the Mechanical Behavior During Friction Welding for AISI 316Abstract; 1 Introduction; 2 Experimental Study; 2.1 Material; 2.2 Welding Process; 3 Mechanical Tests; 3.1 Tensile Test; 3.2 Micro-Hardness Test; 3.3 EDX and XRD Analysis; 4 Discussion; 5 Conclusions; References; 6 A Study of Selective Laser Melting Technology on the Ultra-High Strength Tool Steel Use-Quality, Mechanical Properties and Fatigue; Abstract; 1 Introduction; 2 Materials and Methods; 2.1 SLM Fabrication; 2.2 Machining of Samples; 3 Experimental Works, Results.
3.1 Testing of Machinability of the SLM Specimens3.2 Investigation of Produced Surfaces; 3.3 Fatigue Testing; 3.4 Fractography of the Tested Specimens; 4 Discussion; 5 Conclusions; Acknowledgments; References; 7 Transferability of Fracture Toughness with Constraint; Abstract; 1 Introduction; 2 Constraints at Defect Tip; 2.1 Singular Elastic Stress Distribution; 2.2 Singular Elastic-Plastic Stress Distribution; 2.3 Non-singular Elastic and Elastic Plastic Stress Distribution; 3 The Different Constraint Parameters; 3.1 T Stress; 3.2 Q Parameter; 3.3 Stress Triaxiality.
4 Influence of Constraint on Fracture Toughness5 Influence of Constraint on Transition Temperature; 6 Conclusion; References; 8 Crack Path Stabilisation and T-Stress Estimation in Connection with the Global Approach for Inclined Notches; Abstract; 1 Introduction; 2 Material and Specimen; 3 Determination of Birfurcation Angle; 4 Determination of the Equivalent Notch Stress Intensity Factor; 5 Conclusion; References; 9 Measuring of Strain and Displacements in Welded Joints Subjected to Tensile Load Using Stereometric Methods; Abstract; 1 Introduction; 2 Digital Image Correlation.