Linked e-resources
Details
Table of Contents
Foreword; Preface; Contents; About the Editors; Part I: Wastewater Treatment and Monitoring: Physico-Chemical Treatment; Chapter 1: RSM and ANN-GA Experimental Design Optimization for Electrocoagulation Removal of Chromium; 1 Introduction; 2 Materials and Methods; 2.1 Experimental Setup and Procedure; 2.2 Analytical Techniques; 2.3 Electrocoagulation Process; 2.4 Experimental Design; 2.4.1 Response Surface Methodology; 2.4.2 Artificial Neural Network-Genetic Algorithm; 2.5 Path Analysis; 3 Results and Discussion; 3.1 RSM Modelling and Optimization; 3.2 Centre Composite Design.
3.3 ANN-GA Modelling and Optimization3.4 Path Analysis; 4 Conclusions; References; Chapter 2: Sunlight-Assisted Photo-Fenton Process for Removal of Insecticide from Agricultural Wastewater; 1 Introduction; 2 Materials and Methods; 2.1 Chemicals Used; 2.2 Experimental Procedure; 2.3 Analytical Methods; 3 Result and Discussions; 3.1 Effect of pH; 3.2 Effect of Hydrogen Peroxide Concentration; 3.3 Effect of Ferrous Sulphate Dosing Concentration; 3.4 Effect of Initial Concentration of Insecticide; 3.5 Rate Equation and Kinetics; 3.6 FTIR Spectra Analysis; 4 Conclusion; References.
Chapter 3: Catalytic Reduction of Water Contaminant "4-Nitrophenol" over Manganese Oxide Supported Ni Nanoparticles1 Introduction; 2 Materials and Methods; 2.1 Materials; 2.2 Synthesis; 2.3 Characterizations; 2.4 Catalytic Reduction; 2.5 Computational Methods; 3 Results and Discussion; 3.1 Computational Studies; 4 Conclusions; References; Chapter 4: Simulation of Nitrate Removal in a Batch Flow Electrocoagulation-Flotation (ECF) Process by Response Surface Method ... ; 1 Introduction; 2 Materials and Methods; 2.1 ECF Reactor; 2.2 Experimental Procedure; 2.3 Experimental Design and Data Analysis.
3 Results and Discussion3.1 Development of Regression Model Equation; 4 Conclusions; References; Part II: Wastewater Treatment and Monitoring: Biological Treatment; Chapter 5: Decolourization Studies of a Novel Textile Dye Degrading Bacterium; 1 Introduction; 2 Materials and Methods; 2.1 Source of Sample; 2.2 Isolation of Dye-Decolourizing Bacteria; 2.3 Screening of Dye Decolourizing Bacteria and Decolourization Activity; 2.4 Optimization of Different Parameters for Maximum Decolourization; 2.5 Decolourization Analysis with Optimized Condition; 2.6 Decolourization of Different Dyes.
3 Results and Discussion3.1 Isolation and Screening of Dye Decolourizing Bacteria; 3.2 Dye Decolourization Activity; 3.3 Optimization for Maximum Decolourization; 3.4 Decolourization Activity with Different Dyes; 4 Conclusions; References; Chapter 6: Preliminary Study of Rapid Enhanced Effective Micro-organisms (REEM) in Oil and Grease Trap from Canteen Wastewater; 1 Introduction; 2 Materials and Methods; 2.1 Wastewater Characteristics; 2.2 Characteristics of Rapid Effective Enhancements Micro-organisms (REEM); 2.3 Experimental Set-up; 2.4 REEM Batch Experiments; 3 Results and Discussion.
3.3 ANN-GA Modelling and Optimization3.4 Path Analysis; 4 Conclusions; References; Chapter 2: Sunlight-Assisted Photo-Fenton Process for Removal of Insecticide from Agricultural Wastewater; 1 Introduction; 2 Materials and Methods; 2.1 Chemicals Used; 2.2 Experimental Procedure; 2.3 Analytical Methods; 3 Result and Discussions; 3.1 Effect of pH; 3.2 Effect of Hydrogen Peroxide Concentration; 3.3 Effect of Ferrous Sulphate Dosing Concentration; 3.4 Effect of Initial Concentration of Insecticide; 3.5 Rate Equation and Kinetics; 3.6 FTIR Spectra Analysis; 4 Conclusion; References.
Chapter 3: Catalytic Reduction of Water Contaminant "4-Nitrophenol" over Manganese Oxide Supported Ni Nanoparticles1 Introduction; 2 Materials and Methods; 2.1 Materials; 2.2 Synthesis; 2.3 Characterizations; 2.4 Catalytic Reduction; 2.5 Computational Methods; 3 Results and Discussion; 3.1 Computational Studies; 4 Conclusions; References; Chapter 4: Simulation of Nitrate Removal in a Batch Flow Electrocoagulation-Flotation (ECF) Process by Response Surface Method ... ; 1 Introduction; 2 Materials and Methods; 2.1 ECF Reactor; 2.2 Experimental Procedure; 2.3 Experimental Design and Data Analysis.
3 Results and Discussion3.1 Development of Regression Model Equation; 4 Conclusions; References; Part II: Wastewater Treatment and Monitoring: Biological Treatment; Chapter 5: Decolourization Studies of a Novel Textile Dye Degrading Bacterium; 1 Introduction; 2 Materials and Methods; 2.1 Source of Sample; 2.2 Isolation of Dye-Decolourizing Bacteria; 2.3 Screening of Dye Decolourizing Bacteria and Decolourization Activity; 2.4 Optimization of Different Parameters for Maximum Decolourization; 2.5 Decolourization Analysis with Optimized Condition; 2.6 Decolourization of Different Dyes.
3 Results and Discussion3.1 Isolation and Screening of Dye Decolourizing Bacteria; 3.2 Dye Decolourization Activity; 3.3 Optimization for Maximum Decolourization; 3.4 Decolourization Activity with Different Dyes; 4 Conclusions; References; Chapter 6: Preliminary Study of Rapid Enhanced Effective Micro-organisms (REEM) in Oil and Grease Trap from Canteen Wastewater; 1 Introduction; 2 Materials and Methods; 2.1 Wastewater Characteristics; 2.2 Characteristics of Rapid Effective Enhancements Micro-organisms (REEM); 2.3 Experimental Set-up; 2.4 REEM Batch Experiments; 3 Results and Discussion.