Linked e-resources
Details
Table of Contents
Part 1: Energy Technologies: Energy Technologies
Continuous optimization of the energy input ? The success story of AOS
Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes
Transforming the way electricity is consumed during the aluminium smelting process
The thermodynamics of slag forming inorganic phases in biomass combustion processes
Leaching of Sb from TROF furnace Doré Slag
Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors
Part 3: Energy Technologies: Novel Technologies
Modeling Anthropogenic Heat Flux in Climate Models
In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications
Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method
Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement
Part 4: Energy Technologies: Heat Recovery
Integrated utilization of sewage sludge and coal gangue in clinker manufacture
Valuable metals and energy recovery from electronic waste streams
Dry Granulation of Hot Metal and Heat Recovery from Off-Gas
Energy Recovery of Livestock Waste in Taiwan
Life cycle assessments of incineration treatment for sharp medical waste
Part 5: Energy Technologies: Poster Session
Effect of granularity on pretreatment of coke with microwave irradiation
Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal
Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere
Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I
Maximizing the values of steelmaking slags
Recycling of zinc from the steelmaking dust in the sintering process
Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method
Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II
Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics
Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review
Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III
Chromium removal from iron-rich waste generated during processing lateritic nickel ores
Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization
Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination
Thermodynamic analysis of the recycling of aircraft Al alloys
Lithium-ion Battery Recycling Through Secondary Aluminum Production
Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session
Alternative method for materials separa-tion from crystalline silicon photovoltaic modules
Bioleaching process for metal recovery from waste materials
Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil
Preparing ferrosilicon alloy with copper slag
Research on Optimization of Sintering Mixture with Low-grade Complex Ore
Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties
Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore
Phase Analysis of the Si-O2 System
Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan
Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining
Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment
Evaporation removal of boron in molten silicon using reactive fluxes
Part 12: Solar Cell Silicon: Silicon Photovoltaics
Electrodynamic Eddy Current Separation of End-of-Life PV Materials
Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells
Influence of Oxygen Content on the Wettability of Silicon on Graphite
Particle Separation in Silicon Ingot Casting Using AC Magnetic Field
Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty
Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10
Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery
Accelerating life-cycle management protocols for new generation batteries
Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques
The use of rice husk ash as an aggregate for foundry sand mould production
Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session
Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange
Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane
Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.
Continuous optimization of the energy input ? The success story of AOS
Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes
Transforming the way electricity is consumed during the aluminium smelting process
The thermodynamics of slag forming inorganic phases in biomass combustion processes
Leaching of Sb from TROF furnace Doré Slag
Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors
Part 3: Energy Technologies: Novel Technologies
Modeling Anthropogenic Heat Flux in Climate Models
In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications
Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method
Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement
Part 4: Energy Technologies: Heat Recovery
Integrated utilization of sewage sludge and coal gangue in clinker manufacture
Valuable metals and energy recovery from electronic waste streams
Dry Granulation of Hot Metal and Heat Recovery from Off-Gas
Energy Recovery of Livestock Waste in Taiwan
Life cycle assessments of incineration treatment for sharp medical waste
Part 5: Energy Technologies: Poster Session
Effect of granularity on pretreatment of coke with microwave irradiation
Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal
Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere
Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I
Maximizing the values of steelmaking slags
Recycling of zinc from the steelmaking dust in the sintering process
Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method
Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II
Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics
Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review
Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III
Chromium removal from iron-rich waste generated during processing lateritic nickel ores
Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization
Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination
Thermodynamic analysis of the recycling of aircraft Al alloys
Lithium-ion Battery Recycling Through Secondary Aluminum Production
Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session
Alternative method for materials separa-tion from crystalline silicon photovoltaic modules
Bioleaching process for metal recovery from waste materials
Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil
Preparing ferrosilicon alloy with copper slag
Research on Optimization of Sintering Mixture with Low-grade Complex Ore
Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties
Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore
Phase Analysis of the Si-O2 System
Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan
Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining
Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment
Evaporation removal of boron in molten silicon using reactive fluxes
Part 12: Solar Cell Silicon: Silicon Photovoltaics
Electrodynamic Eddy Current Separation of End-of-Life PV Materials
Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells
Influence of Oxygen Content on the Wettability of Silicon on Graphite
Particle Separation in Silicon Ingot Casting Using AC Magnetic Field
Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty
Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10
Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery
Accelerating life-cycle management protocols for new generation batteries
Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques
The use of rice husk ash as an aggregate for foundry sand mould production
Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session
Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange
Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane
Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments.