Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology
High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons
Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles
Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy
Synthesis of AgNP?s from Industrial Wastes
Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route
Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships
Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies
Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications
Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications
Additive Manufacturing to Produce Standard and Custom Alloy Titanium
Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing
Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification
The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts
SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions
Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing
Scaling Relationships for Direct Ink Writing with Acoustic Focusing
The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size
Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings
Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation
Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms
Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation
Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions
Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths
Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates
Part 5: Advanced High-Strength Steels
Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels
Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles
Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels
Part 6: Advanced Materials in Dental and Orthopedic Applications
Characterization of Chitin Synthesized from Snail Shell
Titanium-magnesium Composite for Dental Implants (BIACOM)
Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V
Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites
Part 8: Applications of Solidification Fundamentals
Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions
Part 9: Biological Materials Science
Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants
Osteoporosis and fatigue fracture prevention by analysis of bone microdamage
Bone Remodeling under Tooth Loading
Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium
Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds
Part 10: Bulk Metallic Glasses XIV
Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass
Part 11: Computational Thermodynamics and Kinetics
Comparison of the Phase-field Models to Predict the Recrystallization Kinetics
Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments
Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations
Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization
Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel
Formation and Control of CaS Inclusion in Gear Steel 20MnCr5
Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models
Thermodynamic Modeling of Al-Fe-Cr Ternary System
Part 12: Defects and Properties of Cast Metals
A Modeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy
Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold
Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron
Effect of Various Aluminum Content on the Formation of Inclusion
Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation
Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting
Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting
The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality
Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process
Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot
Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring
Part 13: Environmentally Assisted Cracking: Theory and Practice
Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron
Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region
Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys
Part 14: General Poster Session
Synthesis and characterization of Al?B4C powders by mechanical alloying
Direct Conversion of Celestite to SrCO3 by Wet Milling
Part 15: High Temperature Electrochemistry III
Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications
Impurity Removal from Titanium Oxycarbide
Next-Generation Molten Oxide Energy Materials R&D
Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt
The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System
Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI
Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel
Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications
Development of Mold Inductor for Power Conversion System
Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling
Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters
Part 18: Phase Transformations and Microstructural Evolution
An Experimental Assessment of the a +a? Miscibility Gap in Fe-Cr
Phase Transformation,

Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron
Morphology of Order-disorder Structures in Rapidly Solidified L12intermetallics
Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings
Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials
Transmission Probability of Diffusing Particles ? A Case Study
Preparation of Porous Titanium Oxide Film by Sol-Gel Method
Part 20: Solid State Precipitation
Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features
Analysis of Beta ́ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods
Carbide Precipitation in a Low-alloy Ferritic Steel
Part 21: Student-Run Symposium: Building Bridges ? Connecting Academic and Industry Research
Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.