Linked e-resources
Details
Table of Contents
Preface; Contents; Metals; 1 Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy After Hot Deformation; 1 Introduction; 2 Experimental Work; 2.1 Material for Research and Investigations Procedure; 2.2 Results and Discussion; 2.2.1 Results of Plastometric Tests; 2.2.2 Metallographic Examination; 2.2.3 FEM Numerical Modelling of Hot Die Forging Process; 2.2.4 Forging Tests in Industrial Conditions; 3 Conclusions; Acknowledgements; References; 2 Positron Annihilation Study on Nanocrystalline Copper Thin Films Doped with Nitrogen; 1 Introduction; 2 Experimental; 3 Results and Discussion
4 ConclusionReferences; 3 The Influence of Microstructure on the Mechanical Behaviour of Dual Phase Steels; 1 Introduction; 2 Microstructural Characterization; 3 Mechanical Characterization; 3.1 Uniaxial Tensile Test; 3.2 Hydraulic Bulge Test; 3.2.1 Biaxial Stress-Strain Curve Conversion to Equivalent Stress-Strain Curve; 4 Conclusions; Acknowledgements; References; Ceramics; 4 Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides; 1 Introduction; 2 Experimental Details; 3 Results and Discussion; 4 Conclusions; Acknowledgements; References
5 Design of Nanocrystalline Cemented Carbides with High Hardness1 Introduction; 2 Justification of the Use of the PPS Method; 3 Conditions of Sintering Nanocrystalline Powders Using the PPS Method; 4 Results of the Microstructure and Hardness; 4.1 Study of Conventional WC-5Co Cemented Carbides Microstructure; 4.2 Microstructure Study of Nanocrystalline Cemented Carbides of the Nano_WC-5Co Type; 4.3 Microstructure Study of Nanocrystalline Cemented Carbides of the Nano_WC-5Co + Cr3C2 Type-with the Addition of Growth Inhibitor; 4.4 Results of Hardness Measurements; 5 Conclusions
AcknowledgementsReferences; 6 Probing Oxygen Vacancies in BaTiO3 Powders and Single Crystals by Micro-Raman Scattering; 1 Introduction; 2 Experimental Details; 3 Results and Discussion; 4 Conclusions; References; Composites; 7 Investigation of Film Formation and Electrical Properties of PS Latex/MWCNT Nanocomposites; 1 Introduction; 2 Experimental; 2.1 Materials; 2.1.1 Preparation of Latex Dispersion; 2.1.2 Multiwalled Carbon Nanotubes (MWCNTs); 2.2 Preparation of PS/MWCNT Composite Films; 2.3 Measurements; 3 Results and Discussions; 3.1 Film Formation Process of PS/MWCNT Composites
3.2 Morphology of the Composites3.3 Film Formation Mechanisms; 3.3.1 Voids Closure; 3.3.2 Healing and Interdiffusion; 3.4 Electrical Conductivity of Composites; 4 Conclusions; References; 8 Cellulose Nanowhiskers Obtained from Waste Recycling of Paper Industry; 1 Introduction; 2 Materials and Methods; 2.1 Materials and Preparation of Nanocrystals; 2.2 Characterization; 2.2.1 Compositional Analysis; 2.2.2 Fourier Transform Infrared Spectroscopy (FTIR); 2.2.3 Thermogravimetric Analysis (TGA); 2.2.4 Scanning Electron Microscopy (SEM); 2.2.5 Dynamic Light Scattering (DLS); 3 Results
4 ConclusionReferences; 3 The Influence of Microstructure on the Mechanical Behaviour of Dual Phase Steels; 1 Introduction; 2 Microstructural Characterization; 3 Mechanical Characterization; 3.1 Uniaxial Tensile Test; 3.2 Hydraulic Bulge Test; 3.2.1 Biaxial Stress-Strain Curve Conversion to Equivalent Stress-Strain Curve; 4 Conclusions; Acknowledgements; References; Ceramics; 4 Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides; 1 Introduction; 2 Experimental Details; 3 Results and Discussion; 4 Conclusions; Acknowledgements; References
5 Design of Nanocrystalline Cemented Carbides with High Hardness1 Introduction; 2 Justification of the Use of the PPS Method; 3 Conditions of Sintering Nanocrystalline Powders Using the PPS Method; 4 Results of the Microstructure and Hardness; 4.1 Study of Conventional WC-5Co Cemented Carbides Microstructure; 4.2 Microstructure Study of Nanocrystalline Cemented Carbides of the Nano_WC-5Co Type; 4.3 Microstructure Study of Nanocrystalline Cemented Carbides of the Nano_WC-5Co + Cr3C2 Type-with the Addition of Growth Inhibitor; 4.4 Results of Hardness Measurements; 5 Conclusions
AcknowledgementsReferences; 6 Probing Oxygen Vacancies in BaTiO3 Powders and Single Crystals by Micro-Raman Scattering; 1 Introduction; 2 Experimental Details; 3 Results and Discussion; 4 Conclusions; References; Composites; 7 Investigation of Film Formation and Electrical Properties of PS Latex/MWCNT Nanocomposites; 1 Introduction; 2 Experimental; 2.1 Materials; 2.1.1 Preparation of Latex Dispersion; 2.1.2 Multiwalled Carbon Nanotubes (MWCNTs); 2.2 Preparation of PS/MWCNT Composite Films; 2.3 Measurements; 3 Results and Discussions; 3.1 Film Formation Process of PS/MWCNT Composites
3.2 Morphology of the Composites3.3 Film Formation Mechanisms; 3.3.1 Voids Closure; 3.3.2 Healing and Interdiffusion; 3.4 Electrical Conductivity of Composites; 4 Conclusions; References; 8 Cellulose Nanowhiskers Obtained from Waste Recycling of Paper Industry; 1 Introduction; 2 Materials and Methods; 2.1 Materials and Preparation of Nanocrystals; 2.2 Characterization; 2.2.1 Compositional Analysis; 2.2.2 Fourier Transform Infrared Spectroscopy (FTIR); 2.2.3 Thermogravimetric Analysis (TGA); 2.2.4 Scanning Electron Microscopy (SEM); 2.2.5 Dynamic Light Scattering (DLS); 3 Results