Part 1. Energy Technologies and CO2 Management Symposium
Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process
Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture
An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data
Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption
Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production
Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder
Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process
The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology
Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis
Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery
Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets
Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove
An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace
Waste Heat Recovery from Aluminum Production
Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation
A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation
Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity
Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session
Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study
Recycling of EAF Dust through Source Separation
A Sustainable Methodology for Recycling Electric Arc Furnace Dust
Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes
Different Methods for the Characterization of Ash Compositions in Co-firing Boilers
Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production
An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants
Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator
Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens
Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model
Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps
Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles
Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China
Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags
Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain
Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition
Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950
Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent
High Temperature Crystallization Kinetics of MgSO4.H2O
Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by "Petrurgic" Method
Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite
Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique
White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents
Part 3. Solar Cell Silicon
Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic
A Review of Solar Silicon Recycling
Thermo-Calc of the Phase Diagram of the Fe-Si System
Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification
Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System
Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules
Part 4. Materials for Energy Conversion and Storage
Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach
Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB
Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material
Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB
A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing
Part 5. Stored Renewable Energy in Coal
Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine
Organic Agriculture Using Biomaterial Coal
Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock
Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone
Enhancement of Coal Nanostructure and Investigation of its Novel Properties.