Linked e-resources
Details
Table of Contents
Part 1. Alumina & Bauxite
Roasting Pretreatment- low Temperature Digestion Method for Comprehensive Utilization of High-sulfur Bauxite
Industrial Experience of Sinter Hydro-chemical Processing at Bogoslovsk Alumina Refinery
Effect of Sintering Conditions on the Stability of 946-2CaO·SiO2 in High Sodium Carbonate Solution
Research on Impurity Removal of Low Grade Bauxite
Study on the Structure and Generation Mechanism of Intermediate (6AlO-OH) in Decomposition Process of Sodium Aluminate Solutions
The Properties of Superfine ATH Precipitated by Carbonation Method
Effect of Organic Impurity on Seed Precipitation in Sodium Aluminate Solution
Fitness-for-service Assessment and Re-rating of Flawed Alumina Feeding Vessels
Miniplant Tests of HCl Technology of Alumina Production
Development and Usage of Detailed Models of Technology at RUSAL Alumina Refineries
Features of Pseudoboehmite from Alumina Production
Digital Transformation in Alumina Refining
Thermodynamics Analysis on Process of Pelletizing Chlorination of Fly Ash
Research on Alumina Preparation from Aluminium Chloride Solution by Electrolysis Process
How Digitalization Can Further Improve Plant Performance and Product Quality
Outotec Pretium Advisory Tool for Alumina Calcination
Expertimental Investigation on Reduction of Cast Iron from Bayer Red Mud and Laterite Nickel
Analyzing the Bauxite Residue Amendment through the Addition of Ca and Mg Hydroxides Followed by Carbonation
Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment
Alumina, Iron and Titanium Extracting from Bauxite Residue with Low Lime Sinter Method
Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids
Effects of Reductive Roasting with Sodium Salts on Leaching Behavior of Non-ferrous Elements in Bauxite Ore Residue
Specific Features of Scandium Behavior during Sodium Bicarbonate Leaching of Red Mud
Flotation Separation of Pyrite from Refractory High-sulfur Bauxite
Research on the Desulfurization of High Sulfur Bauxite
Research on the Interaction between 1-butyl-2-mercaptobenzimidazole and Pyrite
Flotation of Low-grade Bauxite Using Modified Humics as Depressant
Research on the Adsorption of Humic Acid on Pyrite Surface
Experimental Investigation on Desiliconization of Low-grade Bauxite by Flotation Process
The Impact of Backwater Iron Ions on Bauxite Flotation
Part 2. Aluminum Alloys, Processing and Characterization
Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys
Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075
Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys
Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material
Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors
The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy
Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys
Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys
Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof
Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications
Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method
Application of the Hot Stamping Process to Aluminum Alloy Structural Components
Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks
Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy
Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition
Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing
Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature
Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5
Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions
Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample
Development of Innovative Aluminum Alloys with High Mechanical Properties
A General Formulation of Eutectic Silicon Morphology and Processing History
Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test
In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting
Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding
Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters
On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys
Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy
Stiffness Improvement Through Alloying Elements in Al Alloys
Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy
Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy
Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
Part 3.
Aluminum Reduction Technology
Maximizing Previous Pot Design to Have Higher Capacity
On the Use of Multivariate Statistical Methods to Detect, Diagnose and Mitigate Abnormal Events in Aluminium Smelters
Spike Detection Using Advanced Analytics and Data Analysis
Speed, Agility and Simplicity (SAS) Recovery of Reduction Line-5 in Alba
Partial Repair and Restart of a Damaged Aluminium Reduction Cell
Discussion on Alumina Dissolution and Diffusion in Commercial Aluminum Reduction Cell
Investigation of Alumina Concentration Gradients within Hall-Héroult Electrolytic Bath
Study of Alumina Dissolution in Cryolitic Bath to the Vertical Soderberg (VSS) Aluminum Production Process
Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency
Alucell: A Unique Suite of Models to Optimize Pot Performances and Design
Anode Bottom Burnout Shape and Velocity Field Investigation in a High Amperage Electrolysis Cell
CFD Modelling of Alumina Feeding
Effect of Steel Multi-collector Bars on Current Density and Magnetohydrodynamic Stability in an Aluminum Reduction Cell
Numerical Simulation Study on Gas Collecting System of 400kA Grade Aluminum Electrolytic Cell
Study on 3D Full Cell Ledge Shape Calculation and Optimal Design Criteria by Coupled Thermo-flow Model
The Successful Implementation of Energy Saving Technology Based on Steady Flow and Heat Preservation
Current Efficiency in Hall-Héroult Cells: The Role of Mass Transfer at the Cathode
Effects of Current Density on Current Efficiency in Low Temperature Electrolysis with Vertical Electrode Structure
Relationship between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K
Evaluating Effects of Future Shared Mobility and Electrification Trends on Key Intermediate Indicator of Aluminum Transportation Demand: US Vehicle Fleet Size
Improvement in Smelter Process Analysis through EGA Lab Modernization
Two-stage Pot Gas Treatment Technology Allowing the Production of Sodium Sulfate
Improved Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot (KTP)
Alternative Roof-vent Emission Monitoring Method
SPL: An Update
Bubble Dispersion States in the Zinc Oxide Desulfurization Injection Blow Tank
Decision Matrix for Pneumatic Conveying and Distribution of Material
Very Low Energy Consumption Cell Designs: The Cell Heat Balance Challenge
APXe Cell Technology: 7 Years of Low Energy Operation
Development and Industrial Application of NEUI600 High Efficiency Aluminum Reduction Cell
RA-550 Cell Technology: UC RUSAL's New Stage of Technology Development
DX+ Ultra Industrial Version: Preheat Start up and Early Operation
Selecting Technology for Achieving 300,000 T/Year
Why Do We Need to Compete Pot Technology?
AP44 Development at Alma
EGA New D20+ Technology with Reduced Energy Consumption
Potline Start up without Anode Effect Frequency
Thermo-electrical Modeling of an Aluminum Reduction Cell
Restarting Electrochemical Cell with a Cold Metal (D18 Cell)
Part 4. Cast Shop Technology
Root Cause Analysis Findings of a Force 3 Explosion
Condensation Warning System for Dry Material Storage
A New Aluminium Crucible Skimmer (ACS) for Smelter Plants
Main Benefits Further to Two Years of Experimentation in Industrial Environment
Drive-in Feeding of Crucibles for Casting Machine
In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser
The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance
Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes
Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes
Constellium's R & D on the Use of Power Ultrasound in Liquid Aluminum: An Overview
Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability
On-site Benchmark of LiMCA II vs. LiMCA III for.
Roasting Pretreatment- low Temperature Digestion Method for Comprehensive Utilization of High-sulfur Bauxite
Industrial Experience of Sinter Hydro-chemical Processing at Bogoslovsk Alumina Refinery
Effect of Sintering Conditions on the Stability of 946-2CaO·SiO2 in High Sodium Carbonate Solution
Research on Impurity Removal of Low Grade Bauxite
Study on the Structure and Generation Mechanism of Intermediate (6AlO-OH) in Decomposition Process of Sodium Aluminate Solutions
The Properties of Superfine ATH Precipitated by Carbonation Method
Effect of Organic Impurity on Seed Precipitation in Sodium Aluminate Solution
Fitness-for-service Assessment and Re-rating of Flawed Alumina Feeding Vessels
Miniplant Tests of HCl Technology of Alumina Production
Development and Usage of Detailed Models of Technology at RUSAL Alumina Refineries
Features of Pseudoboehmite from Alumina Production
Digital Transformation in Alumina Refining
Thermodynamics Analysis on Process of Pelletizing Chlorination of Fly Ash
Research on Alumina Preparation from Aluminium Chloride Solution by Electrolysis Process
How Digitalization Can Further Improve Plant Performance and Product Quality
Outotec Pretium Advisory Tool for Alumina Calcination
Expertimental Investigation on Reduction of Cast Iron from Bayer Red Mud and Laterite Nickel
Analyzing the Bauxite Residue Amendment through the Addition of Ca and Mg Hydroxides Followed by Carbonation
Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment
Alumina, Iron and Titanium Extracting from Bauxite Residue with Low Lime Sinter Method
Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids
Effects of Reductive Roasting with Sodium Salts on Leaching Behavior of Non-ferrous Elements in Bauxite Ore Residue
Specific Features of Scandium Behavior during Sodium Bicarbonate Leaching of Red Mud
Flotation Separation of Pyrite from Refractory High-sulfur Bauxite
Research on the Desulfurization of High Sulfur Bauxite
Research on the Interaction between 1-butyl-2-mercaptobenzimidazole and Pyrite
Flotation of Low-grade Bauxite Using Modified Humics as Depressant
Research on the Adsorption of Humic Acid on Pyrite Surface
Experimental Investigation on Desiliconization of Low-grade Bauxite by Flotation Process
The Impact of Backwater Iron Ions on Bauxite Flotation
Part 2. Aluminum Alloys, Processing and Characterization
Grain Boundary Precipitation and Fracture Behavior of Al-Cu-Li Alloys
Comparison of Texture and Surface Finish Evolution during Single Point Incremental Forming and Formability Testing of AA 7075
Understanding the Co-precipitation Mechanisms of Al3(Sc, Zr) with Strengthening Phases in Extruded Al-Cu-Li Model Alloys
Determining a Retrogression Heat Treatment to Apply during Warm Forming of a High Strength AA7075 Sheet Material
Development of High-strength and High-electrical-conductivity Aluminum Alloys for Power Transmission Conductors
The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy
Influence of Additional Elements (Si Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys
Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-resistant Alloys
Phase Formation of Monotectic Al-In and Al-Ga-In Alloys and Implications Thereof
Investigations on Pb-free 6000 Series Aluminum Alloy for Machining Applications
Optimization in Novel Partial-solid High Pressure Aluminum Die Casting by Taguchi Method
Application of the Hot Stamping Process to Aluminum Alloy Structural Components
Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks
Grain Refinement of Al-Si-Mg Cast Alloys by Al3Ti3B Master Alloy
Improving Bendability of Al-Mg-Si Alloy Sheet by Minor Alloying Element Addition
Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing
Understanding Large-strain Softening of Aluminum in Shear at Elevated Temperature
Assessments of Sc-containing Ternary Systems Al-Sc-Ti and Al-Sc-Zr within the Thermodynamic Database for Aluminium Alloys, TCAL5
Multiscale Model for Al-Li Material Processing Simulation under Forging Conditions
Investigation of Effect of Aging Treatment on Deformation Behavior of Al-Mg-Si Alloy Using Quasi-2D Polycrystalline Sample
Development of Innovative Aluminum Alloys with High Mechanical Properties
A General Formulation of Eutectic Silicon Morphology and Processing History
Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test
In-situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting
Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys during Refilled Friction Stir Spot Welding
Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters
On Si Redistribution during Friction Stir Processing of Cast Al-7%Si-0.4%Mg Alloys
Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy
Stiffness Improvement Through Alloying Elements in Al Alloys
Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al-Cu Alloy
Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy
Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
Part 3.
Aluminum Reduction Technology
Maximizing Previous Pot Design to Have Higher Capacity
On the Use of Multivariate Statistical Methods to Detect, Diagnose and Mitigate Abnormal Events in Aluminium Smelters
Spike Detection Using Advanced Analytics and Data Analysis
Speed, Agility and Simplicity (SAS) Recovery of Reduction Line-5 in Alba
Partial Repair and Restart of a Damaged Aluminium Reduction Cell
Discussion on Alumina Dissolution and Diffusion in Commercial Aluminum Reduction Cell
Investigation of Alumina Concentration Gradients within Hall-Héroult Electrolytic Bath
Study of Alumina Dissolution in Cryolitic Bath to the Vertical Soderberg (VSS) Aluminum Production Process
Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency
Alucell: A Unique Suite of Models to Optimize Pot Performances and Design
Anode Bottom Burnout Shape and Velocity Field Investigation in a High Amperage Electrolysis Cell
CFD Modelling of Alumina Feeding
Effect of Steel Multi-collector Bars on Current Density and Magnetohydrodynamic Stability in an Aluminum Reduction Cell
Numerical Simulation Study on Gas Collecting System of 400kA Grade Aluminum Electrolytic Cell
Study on 3D Full Cell Ledge Shape Calculation and Optimal Design Criteria by Coupled Thermo-flow Model
The Successful Implementation of Energy Saving Technology Based on Steady Flow and Heat Preservation
Current Efficiency in Hall-Héroult Cells: The Role of Mass Transfer at the Cathode
Effects of Current Density on Current Efficiency in Low Temperature Electrolysis with Vertical Electrode Structure
Relationship between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K
Evaluating Effects of Future Shared Mobility and Electrification Trends on Key Intermediate Indicator of Aluminum Transportation Demand: US Vehicle Fleet Size
Improvement in Smelter Process Analysis through EGA Lab Modernization
Two-stage Pot Gas Treatment Technology Allowing the Production of Sodium Sulfate
Improved Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot (KTP)
Alternative Roof-vent Emission Monitoring Method
SPL: An Update
Bubble Dispersion States in the Zinc Oxide Desulfurization Injection Blow Tank
Decision Matrix for Pneumatic Conveying and Distribution of Material
Very Low Energy Consumption Cell Designs: The Cell Heat Balance Challenge
APXe Cell Technology: 7 Years of Low Energy Operation
Development and Industrial Application of NEUI600 High Efficiency Aluminum Reduction Cell
RA-550 Cell Technology: UC RUSAL's New Stage of Technology Development
DX+ Ultra Industrial Version: Preheat Start up and Early Operation
Selecting Technology for Achieving 300,000 T/Year
Why Do We Need to Compete Pot Technology?
AP44 Development at Alma
EGA New D20+ Technology with Reduced Energy Consumption
Potline Start up without Anode Effect Frequency
Thermo-electrical Modeling of an Aluminum Reduction Cell
Restarting Electrochemical Cell with a Cold Metal (D18 Cell)
Part 4. Cast Shop Technology
Root Cause Analysis Findings of a Force 3 Explosion
Condensation Warning System for Dry Material Storage
A New Aluminium Crucible Skimmer (ACS) for Smelter Plants
Main Benefits Further to Two Years of Experimentation in Industrial Environment
Drive-in Feeding of Crucibles for Casting Machine
In-line Salt Fluxing Process with an FFDTM Industrial Experience with a Box-Type Degasser
The "Alcoa Filter System": A Cost Effective Solution for Enhanced CFF Performance
Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes
Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminium Tubes
Constellium's R & D on the Use of Power Ultrasound in Liquid Aluminum: An Overview
Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability
On-site Benchmark of LiMCA II vs. LiMCA III for.