Part 1. Superalloy 718 & Derivatives: Keynotes
Age Hardenable Nickel-based Alloy Developments and Research for New High Temperature Power Cycles
Superalloy 718; Evolution of the Alloy from High to Low Temperature Application
Part 2. Alternative Processes
Alloy 718: Laser Powder Bed Additive Manufacturing for Turbine Applications
Progress in the Processing and Understanding of Alloy 718 Fabricated through Powder Bed Additive Manufacturing Processes
Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718
The effect of location and post-treatment on the microstructure of EBM-built Alloy 718
Part 3. Applications
ICME Based Additive Manufacturing of Alloy 230 Components
Simulation of Co-Precipitation Kinetics in Superalloy 718
Part 4. Corrosion
Performance of Wrought Superalloys in Extreme Environments
Corrosion and Carburization Behavior of Ni-Cr-Mo-Nb Superalloys in a High Temperature Supercritical-CO2 Environment
High Performance New Ni-base Alloy AF955 (UNS N09955) for Oil and Gas Industry
Hydrogen Influence on Crack Propagation and Stress-Strain Evolution of Alloy 718
Isothermal Oxidation Behavior of EBM-additive Manufactured Alloy 718
Part 5. Melting and Casting
A Computational Model of the Electroslag Remelting (ESR) Process and Its Application to an Industrial Process for a Large Diameter Superalloy Ingot
Effect of Homogenization Temperature on Microstructures of IN718C Alloy with Different Solidification Cooling Rates
Grain Refinement of IN718 Superalloy under the Modified Thermally-controlled Solidification Process
Melt Parameters and Resulting Characteristics in Laboratory-Scale Electroslag Remelting
Production of Nitride-free 718 by the VIM-VAR Processing Route
Part 6. Microstructure and Behavior
Characterization and Modeling of Deformation Mechanisms in Ni-base Superalloy 718
Characterization of Nano-Scale’ Phase in HPT-Disk P/M Superalloys HGN300 by Small-Angle X-ray Scattering
Development of an Automated Property Simulation Tool for Direct Aged Alloy 718 Engine Disk Forgings
Microstructure Dependence of Dynamic Impact Behaviour of ATI 718Plus Superalloy
3D Stochastic Modelling of Microstructure Evolution during Solidification of Alloy 718
Analysis of microporosity-dependent fatigue crack behavior in Alloy 718 by using synchronic radiation X-ray CT and FEM
Characterisation of the Initial Stages of Dynamic Recrystallisation in ATI 718Plus®
Compositional Design and Mechanical Properties of INCONEL® Alloy 725 Variants
Constrained Lattice Misfit Measurement in Bulk Inconel 718 Using High Resolution Neutron Diffraction
Dependence of Creep Strength on Cooling Rate after Subsolvus Solution Treatment in Wrought Alloy 718
Depletion Induced Grain Growth in Alloy 751 after Long Term Aging and Its Effect on Fatigue
Effect of Grain-Boundary Fe2Nb Phase on Stress-assisted Grain-Boundary Oxidation Behavior in Novel Austenitic Heat-resistant Steel of Fe-20Cr-35Ni-2.5Nb
Effect of Heat Treatment on Microstructure and Mechanical Properties of VDM Alloy 780 Premium
Effect of Homogenization on Creep of Additive Manufactured Inconel 718
Effects of HIP and Heat Treatment on Microstructure, Fracture Toughness and Fatigue Crack Growth Behavior of SLM-Based IN718
Effects of Phosphorus Addition on Creep Properties of Wrought Gamma-Prime Strengthened Ni-based Superalloy
Enhanced Strength of Inconel 718 by High Rate Severe Plastic Deformation
Evaluation of the Stress-Strain State in Alloy 718 after Hydrogen Charging
Experimental TTT Diagram of HAYNES 282 Alloy
Influence of Residual Stresses on Aging Precipitation Behavior of Alloy 718
Machine learning to optimize additive manufacturing parameters for laser powder bed fusion of Inconel 718
Mechanical Performance of Various INCONEL® 740/740H Alloy Compositions for Use in A-USC Castings
Microstructural Characterization and Mechanical Properties of Rene 65 Precipitates
Microstructure Development in Track-by-track Melting of EBM-manufactured Alloy 718
Modeling Tensile, Compressive, and Cyclic Response of Inconel 718 Using a Crystal Plasticity Model Incorporating the Effects of Precipitates
Novel Fractgraphy of Ni-based Alloy by SEM/EBSD Method
On the Effect of Alloying Additions to the Ni-Cr-Al-Nb Dual-Superlattice Gamma-Gamma Prime-Gamma Double Prime Superalloys
Optimization of the Forging Process Window in Respect of AGG, IGG and Direct Age Effect in Alloy 718 Engine Disks
Oxidation-assisted cracking at 650 °C in superalloy 718 manufactured by Laser Beam Melting: Effect of temperature and strain rate
Precipitation Behavior and Mechanism of Sigma Phase in Alloy 925
Quantitative Texture Prediction of Epitaxial Columnar Grains in Inconel 718 Processed by Additive Manufacturing
Research of Twin Induced LCF Cracking for 718 Alloy Using In-Situ Observation
Shear Spinning of Nickelbased Superalloy 718
Strain Controlled Low Cycle Fatigue Behaviors of U720Li Disk Superalloy above 700 °C
Stress Relaxation Behavior Comparison of Typical Nickel-base Superalloys for Fasteners
Study of the Oxidation Assisted Intergranular Cracking Mechanism on a Ni-base Superalloy
The Effect of Grain Size on the Dwell Fatigue Crack Growth Rate of Alloy 718Plus
Thermal Processing Design of Cast INCONEL® Alloy 740H for Improved Mechanical Performance
Part 6. Welding and Joining
Factors Influencing Weldability of Nickel Superalloy Investment Castings
Fracture Toughness and Fatigue Behaviour of Variably Precipitated Inconel 625/AISI 304L Welds
Pitting Behavior of Thermally Aged Inconel 625 Weld Claddings Made Using SMAW and GMAW Process
Review of weldability of precipitation hardening Ni- and Fe-Ni-based superalloys
The Influence of Base Metal Microstructure on Weld Cracking in Manually GTA Repair Welded Cast ATI 718Plus®
Varestraint Weldability Testing of ATI 718Plus®
Influence of Eta Phase
Part 7. Wrought Process
The Case for Physical Experiments in a Digital Age
The High-Temperature Bauschinger Effect in Alloy 718
Influence of Temperature and Strain Rate during Rolling of René 65 Bar
Microstructure Controlling of U720-typed Superalloys to Improve a Hot and Cold Workability by Using Incoherent Gamma Prime
Ring Rolling of IN718 for Critical Engine Applications
The Abnormal Dynamic Recrystallization Behavior of Alloy 706 for Large Size Disc
Part 8. Other Topics
Application of Analytical Electron Microscopy and Tomographic Techniques for Metrology and 3D Imaging of Microstructural Elements in Allvac 718Plus
Computed Tomography as an Alternative Method to Measure Crack Growth in Non-conventional Geometries
Development of New Alloy 718 with Super Machinability
Development of Ni-base Disk Alloy for Large-size Gas Turbines by Improving Macrosegregation Property of Alloy 718.