|
1.
|
For this project, there were two main objectives. The first objective was to validate that
high-density polyethylene could be used for thermoformed plastic drink cup lid [...]
2018-11-28 |
|
|
2.
|
This document describes the design and construction of a cup lid application mechanism
that will apply cup lids to a to go cup. The mechanism is designed to be implemente[...]
2018-12-05 |
|
|
3.
|
This project describes the designing, analyzing, and implementing of an actuating
exoskeleton hand, used to increase the strength, mobility, and endurance of the fingers.[...]
2018-04-18 |
|
|
4.
|
The University of Southern Indiana has expressed interest in the restoration of a wetland located
adjacent to Nurrenbern Road in Southern Vanderburgh County. Once constru[...]
2018-04-18 |
|
|
5.
|
This project attempts to use a Light Detection and Ranging [LiDAR] system
alongside algorithms, which will construct a 2D map of its surroundings and locate itself
within[...]
2018-04-18 |
|
|
6.
|
Vehicle corrosion is a considerable reason for concern in the automotive industry; mainly
due to its aesthetic, quality and safety implications. Anticorrosive methods are[...]
2018-04-18 |
|
|
7.
|
The purpose of this project was to improve upon a design created by McDonnell Douglas
Astronautics Company in 1978 for a Nitinol wire heat engine. The goal of our project[...]
2018-04-18 |
|
|
8.
|
The purpose of this project is to create a manufacturing process of a transmission that is
integrated with a planetary gear set to meet a 4,000-unit annual demand. Univer[...]
2018-04-18 |
|
|
9.
|
Hoboken, New Jersey : Wiley, 2015. 2015
|
|
10.
|
Chicago : University of Chicago Press, 2024. ©2024.
|
